Re: [PATCH] arm64: dts: meson-sm1: fix wrong GPIO domain for GPIOE_2

[Neil Armstrong]

Hi,

On 27/01/2022 13:25, Dongjin Kim wrote:
> GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
> GPIOZ_14 connected to INTR of 'RTL8211F' on ODROID-HC and TF_PWR_EN of
> 'FC8731' on BPI-M5
> 
> Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
> Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
> 
> Signed-off-by: Dongjin Kim <tobetter@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 2 +-
>  arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi     | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
> index 212c6aa5a3b8..5751c48620ed 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
> @@ -123,7 +123,7 @@ vddio_c: regulator-vddio_c {
>  		regulator-min-microvolt = <1800000>;
>  		regulator-max-microvolt = <3300000>;
>  
> -		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
> +		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  		regulator-always-on;
>  
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index bf29afac645f..d4349b355e4a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -52,7 +52,7 @@ tf_io: gpio-regulator-tf_io {
>  		regulator-max-microvolt = <3300000>;
>  		vin-supply = <&vcc_5v>;
>  
> -		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
> +		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  		regulator-always-on;
>  
> 
Thanks for the fixes,
can you send 2 patches fixing each files instead ?

Thanks,
Neil