Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during probe

[Pavan Kondeti]

On Fri, Jan 28, 2022 at 02:36:38AM -0600, Steev Klimaszewski wrote:
> Hi Sandeep,
> 
> On 1/25/22 3:17 AM, Sandeep Maheswaram wrote:
> >Hi Steev,
> >
> >>I didn't face any such issue with devices connected.
> >>
> >>I think this is because I used IRQ_TYPE_EDGE_BOTH in device tree and
> >>Steev has IRQ_TYPE_LEVEL_HIGH in his device tree.
> >>
> >>When i changed to IRQ_TYPE_LEVEL_HIGH I also observed a storm of
> >>interrupts in my device though it booted .
> >>
> >>Regards
> >>
> >>Sandeep
> >>
> >Can you try with IRQ_TYPE_EDGE_BOTH in your device tree and see if you are
> >getting the issue.
> >
> >Regards
> >
> >Sandeep
> >
> I just tested here, changing both of the IRQ_TYPE_LEVEL_HIGH in the yoga's
> dts to EDGE_BOTH and I still do not get a booting system.
> 

Sandeep,

For whatever reason, if the interrupt comes immediately after enabling it in
the probe, are we ready to call pm_runtime_resume(&dwc->xhci->dev); ? 

I am not sure if Steev is facing an interrupt storm issue or some kind of
incorrect access and device is crashing. In any case, can you simulate this
and see if we can call the above runtime PM API in dwc->xhci->dev immediately
after enabling the IRQs.

Thanks,
Pavan