Re: [PATCH v16, 2/2] net: Add dm9051 driver
From: Jakub Kicinski
Date: Tue Feb 01 2022 - 23:51:30 EST
On Sun, 30 Jan 2022 00:43:46 +0800 Joseph CHAMG wrote:
> + rdptr = skb_put(skb, rxlen - 4);
> + ret = regmap_noinc_read(db->regmap_dm, DM_SPI_MRCMD, rdptr, rxlen);
> + if (ret) {
should be counted as rx_error
> + dev_kfree_skb(skb);
> + return ret;
> + }
> +
> + ret = regmap_write(db->regmap_dm, DM9051_ISR, 0xff); /* to stop mrcmd */
> + if (ret)
> + return ret;
leaks skb, also should be counted as rx_error
> + skb->protocol = eth_type_trans(skb, db->ndev);
> + if (db->ndev->features & NETIF_F_RXCSUM)
> + skb_checksum_none_assert(skb);
> + netif_rx_ni(skb);
> + db->ndev->stats.rx_bytes += rxlen;
> + db->ndev->stats.rx_packets++;
> + scanrr++;
> + } while (!ret);
> +
> + return scanrr;
> +}
> +
> +/* transmit a packet,
> + * return value,
> + * 0 - succeed
> + * -ETIMEDOUT - timeout error
> + */
> +static int dm9051_single_tx(struct board_info *db, u8 *buff, unsigned int len)
> +{
> + int ret;
> +
> + ret = dm9051_map_xmitpoll(db);
> + if (ret)
> + return ret;
> +
> + ret = regmap_noinc_write(db->regmap_dm, DM_SPI_MWCMD, buff, len);
> + if (ret)
> + return ret;
> +
> + ret = regmap_bulk_write(db->regmap_dmbulk, DM9051_TXPLL, &len, 2);
> + if (ret < 0)
> + return ret;
> +
> + return regmap_write(db->regmap_dm, DM9051_TCR, TCR_TXREQ);
> +}
> +
> +static int dm9051_loop_tx(struct board_info *db)
> +{
> + struct net_device *ndev = db->ndev;
> + int ntx = 0;
> + int ret;
> +
> + while (!skb_queue_empty(&db->txq)) {
> + struct sk_buff *skb;
> +
> + skb = skb_dequeue(&db->txq);
> + if (skb) {
> + ntx++;
> + ret = dm9051_single_tx(db, skb->data, skb->len);
> + dev_kfree_skb(skb);
> + if (ret < 0)
> + return 0;
Should be counted as tx error?
> + ndev->stats.tx_bytes += skb->len;
> + ndev->stats.tx_packets++;
> + }
> +
> + if (netif_queue_stopped(ndev) &&
> + (skb_queue_len(&db->txq) < DM9051_TX_QUE_LO_WATER))
> + netif_wake_queue(ndev);
> + }
> +
> + return ntx;