[PATCH] mfd: sprd: Add SPI device ID table

[Mark Brown]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Cc: Orson Zhai <orsonzhai@xxxxxxxxx>
Cc: Baolin Wang <baolin.wang7@xxxxxxxxx>
Cc: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
---

Rebased onto v5.17-rc1.

 drivers/mfd/sprd-sc27xx-spi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
index 55d2c31bdfb2..864031eccd4c 100644
--- a/drivers/mfd/sprd-sc27xx-spi.c
+++ b/drivers/mfd/sprd-sc27xx-spi.c
@@ -239,6 +239,12 @@ static int sprd_pmic_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume);
 
+static const struct spi_device_id sprd_pmic_spi_ids[] = {
+	{ .name = "sc2731", .driver_data = (unsigned long)&sc2731_data },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, sprd_pmic_spi_ids);
+
 static const struct of_device_id sprd_pmic_match[] = {
 	{ .compatible = "sprd,sc2731", .data = &sc2731_data },
 	{ .compatible = "sprd,sc2730", .data = &sc2730_data },
-- 
2.30.2