[PATCH v3 03/14] arm64: dts: qcom: sc7280: Properly sort sdc pinctrl lines

[Douglas Anderson]

The sdc1 / sdc2 pinctrl lines were randomly stuffed in the middle of
the qup pinctrl lines. Sort them properly. This is a no-op
change. Just code movement.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 154 +++++++++++++--------------
 1 file changed, 77 insertions(+), 77 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index d4009cc0bb78..40cb414bc377 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3783,83 +3783,6 @@ qup_uart7_rx: qup-uart7-rx {
 				function = "qup07";
 			};
 
-			sdc1_on: sdc1-on {
-				clk {
-					pins = "sdc1_clk";
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-				};
-
-				data {
-					pins = "sdc1_data";
-				};
-
-				rclk {
-					pins = "sdc1_rclk";
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				data {
-					pins = "sdc1_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				rclk {
-					pins = "sdc1_rclk";
-					bias-bus-hold;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				clk {
-					pins = "sdc2_clk";
-				};
-
-				cmd {
-					pins = "sdc2_cmd";
-				};
-
-				data {
-					pins = "sdc2_data";
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				cmd {
-					pins ="sdc2_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				data {
-					pins ="sdc2_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-			};
-
 			qup_uart8_cts: qup-uart8-cts {
 				pins = "gpio32";
 				function = "qup10";
@@ -4019,6 +3942,83 @@ qup_uart15_rx: qup-uart15-rx {
 				pins = "gpio63";
 				function = "qup17";
 			};
+
+			sdc1_on: sdc1-on {
+				clk {
+					pins = "sdc1_clk";
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+				};
+
+				data {
+					pins = "sdc1_data";
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+				};
+			};
+
+			sdc1_off: sdc1-off {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-bus-hold;
+				};
+			};
+
+			sdc2_on: sdc2-on {
+				clk {
+					pins = "sdc2_clk";
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+				};
+
+				data {
+					pins = "sdc2_data";
+				};
+			};
+
+			sdc2_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd {
+					pins ="sdc2_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data {
+					pins ="sdc2_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		imem@146a5000 {
-- 
2.35.0.rc2.247.g8bbb082509-goog