[PATCH v3 05/14] arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrl

[Douglas Anderson]

Specifying "input-enable" on a MSM GPIO is a no-op for the most
part. The only thing it really does is to explicitly force the output
of a GPIO to be disabled right at the point of a pinctrl
transition. We don't need to do this and we don't typically specify
"input-enable" unless there's a good reason to. Remove it.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 7a987bc9b758..23e656e51904 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -534,7 +534,6 @@ sd_cd: sd-cd {
 	sw_ctrl: sw-ctrl {
 		pins = "gpio86";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 };
-- 
2.35.0.rc2.247.g8bbb082509-goog