Re: [PATCH] PCI: pciehp: clear cmd_busy bit when Command Completed in polling mode

[Lukas Wunner]

Hi Bjorn,

the below patch is marked "Changes Requested" in patchwork:

https://patchwork.kernel.org/project/linux-pci/patch/20211111054258.7309-1-zhangliguang@xxxxxxxxxxxxxxxxx/

I think that might be erroneous because the patch is correct,
I've provided a Reviewed-by and no change requests are recorded
in patchwork or the mailing list archive.

If you've got a few minutes to spare, could you double-check the
state in patchwork and provide Liguang Zhang with the changes you'd
want (if any)?

Thanks!

Lukas

On Fri, Nov 26, 2021 at 06:33:09PM +0100, Lukas Wunner wrote:
> On Thu, Nov 11, 2021 at 01:42:58PM +0800, Liguang Zhang wrote:
> > This patch fixes this problem that on driver probe from system startup,
> > pciehp checks the Presence Detect State bit in the Slot Status register
> > to bring up an occupied slot or bring down an unoccupied slot. If empty
> > slot's power status is on, turn power off. The Hot-Plug interrupt isn't
> > requested yet, so avoid triggering a notification by calling
> > pcie_disable_notification().
> > 
> > Both the CCIE and HPIE bits are masked in pcie_disable_notification(),
> > when we issue a hotplug command, pcie_wait_cmd() will polling the
> > Command Completed bit instead of waiting for an interrupt. But cmd_busy
> > bit was not cleared when Command Completed which results in timeouts
> > like this in pciehp_power_off_slot() and pcie_init_notification():
> > 
> >   pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0
> > (issued 2264 msec ago)
> >   pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0
> > (issued 2288 msec ago)
> > 
> > Signed-off-by: Liguang Zhang <zhangliguang@xxxxxxxxxxxxxxxxx>
> 
> Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary")
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143
> Reviewed-by: Lukas Wunner <lukas@xxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # v4.2+
> 
> Thanks a lot, that's a really good catch.
> 
> It's a somewhat intricate bug, so I'll try to explain in my own words:
> 
> If notification is disabled (HPIE or CCIE not set in the Slot Status
> register), we rely on pcie_poll_cmd() to poll for Command Completed.
> But once it's signaled, we neglect to clear ctrl->cmd_busy.
> (Normally it is cleared by the hardirq handler pciehp_isr() if
> notification is enabled.)
> 
> The result is that starting with the second Slot Control write,
> pciehp will gratuitously wait for a command to finish which has
> already finished and it will incorrectly report a timeout.
> 
> The bug was originally introduced in 2015 by commit a5dd4b4b0570
> ("PCI: pciehp: Wait for hotplug command completion where necessary"),
> but didn't manifest itself because the first Slot Control Write already
> enabled notification and from that point on the hardirq handler would
> clear ctrl->cmd_busy.  However I think the bug may have manifested
> itself with pciehp_poll_mode=1.
> 
> It wasn't until commit 4e6a13356f1c ("PCI: pciehp: Deduplicate presence
> check on probe & resume") that multiple consecutive Slot Control writes
> were performed on ->probe with notification disabled, so that's the
> commit which first exposed the bug with pciehp_poll_mode=0.
> 
> Thanks,
> 
> Lukas
> 
> > ---
> >  drivers/pci/hotplug/pciehp_hpc.c | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> > index 83a0fa119cae..8698aefc6041 100644
> > --- a/drivers/pci/hotplug/pciehp_hpc.c
> > +++ b/drivers/pci/hotplug/pciehp_hpc.c
> > @@ -98,6 +98,8 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
> >  		if (slot_status & PCI_EXP_SLTSTA_CC) {
> >  			pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> >  						   PCI_EXP_SLTSTA_CC);
> > +			ctrl->cmd_busy = 0;
> > +			smp_mb();
> >  			return 1;
> >  		}
> >  		msleep(10);
> > -- 
> > 2.19.1.6.gb485710b