Re: [PATCH] ARM: dts: at91: sama7g5: Add crypto nodes

[Nicolas Ferre]

On 04/02/2022 at 18:36, Tudor Ambarus - M18064 wrote:
> On 2/4/22 15:37, Tudor Ambarus wrote:
> > Describe and enable the AES, SHA and TDES crypto IPs.
> >
> > Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> > ---
> >   arch/arm/boot/dts/sama7g5.dtsi | 35 ++++++++++++++++++++++++++++++++++
> >   1 file changed, 35 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
> > index 7972cb8c2562..1f2731a64139 100644
> > --- a/arch/arm/boot/dts/sama7g5.dtsi
> > +++ b/arch/arm/boot/dts/sama7g5.dtsi
> > @@ -393,6 +393,29 @@ pit64b1: timer@e1804000 {
> >   			clock-names = "pclk", "gclk";
> >   		};
> >   
> > +		aes: aes@e1810000 {
> > +			compatible = "atmel,at91sam9g46-aes";
> > +			reg = <0xe1810000 0x100>;
> > +			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> > +			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
> > +			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
> > +			dma-names = "tx", "rx";
> > +			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> > +			clock-names = "aes_clk";
> > +			status = "okay";
> > +		};
> > +
> > +		sha: sha@e1814000 {
> > +			compatible = "atmel,at91sam9g46-sha";
> > +			reg = <0xe1814000 0x100>;
> > +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > +			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
> > +			dma-names = "tx";
> > +			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
> > +			clock-names = "sha_clk";
> > +			status = "okay";
> > +		};
> > +
> >   		flx0: flexcom@e1818000 {
> >   			compatible = "atmel,sama5d2-flexcom";
> >   			reg = <0xe1818000 0x200>;
> > @@ -475,6 +498,18 @@ trng: rng@e2010000 {
> >   			status = "disabled";
> >   		};
> >   
> > +		tdes@e2014000 {
> tdes: tdes@e2014000
>
> I should have added a label here. Nicolas, maybe you can add it when applying,
> if everything else looks ok to you.

Yep, if everything else is okay I can definitively add it when applying.

Regards,
  Nicolas

> > +			compatible = "atmel,at91sam9g46-tdes";
> > +			reg = <0xe2014000 0x100>;
> > +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > +			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
> > +			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
> > +			dma-names = "tx", "rx";
> > +			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
> > +			clock-names = "tdes_clk";
> > +			status = "okay";
> > +		};
> > +
> >   		flx4: flexcom@e2018000 {
> >   			compatible = "atmel,sama5d2-flexcom";
> >   			reg = <0xe2018000 0x200>;


--
Nicolas Ferre