Re: (EXT) [RFC PATCH v4 03/12] dt-bindings: media: Add bindings for bcm2835-unicam

[Laurent Pinchart]

Hi Alexander,

On Fri, Feb 04, 2022 at 09:50:06AM +0100, Alexander Stein wrote:
> Am Donnerstag, 3. Februar 2022, 18:50:00 CET schrieb Jean-Michel Hautbois:
> > Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
> > camera interface. Also add a MAINTAINERS entry for it.
> > 
> > Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> > Signed-off-by: Naushir Patuck <naush@xxxxxxxxxxxxxxx>
> > Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxxxxxxxx>
> > 
> > ---
> > v4:
> > - make MAINTAINERS its own patch
> > - describe the reg and clocks correctly
> > - use a vendor entry for the number of data lanes
> > ---
> >  .../bindings/media/brcm,bcm2835-unicam.yaml   | 110 ++++++++++++++++++
> >  1 file changed, 110 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> > b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml new file
> > mode 100644
> > index 000000000000..0725a0267c60
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Broadcom BCM283x Camera Interface (Unicam)
> > +
> > +maintainers:
> > +  - Raspberry Pi Kernel Maintenance <kernel-list@xxxxxxxxxxxxxxx>
> > +
> > +description: |-
> > +  The Unicam block on BCM283x SoCs is the receiver for either
> > +  CSI-2 or CCP2 data from image sensors or similar devices.
> > +
> > +  The main platform using this SoC is the Raspberry Pi family of boards.
> > +  On the Pi the VideoCore firmware can also control this hardware block,
> > +  and driving it from two different processors will cause issues.
> > +  To avoid this, the firmware checks the device tree configuration
> > +  during boot. If it finds device tree nodes starting by csi then
> > +  it will stop the firmware accessing the block, and it can then
> > +  safely be used via the device tree binding.
> > +
> > +properties:
> > +  compatible:
> > +    const: brcm,bcm2835-unicam
> > +
> > +  reg:
> > +    items:
> > +      - description: Unicam block.
> > +      - description: Clock Manager Image (CMI) block.
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Clock to drive the LP state machine of Unicam.
> > +      - description: Clock for the vpu (core clock).
> > +
> > +  clock-names:
> > +    items:
> > +      - const: lp
> > +      - const: vpu
> > +
> > +  power-domains:
> > +    items:
> > +      - description: Unicam power domain
> > +
> > +  brcm,num-data-lanes:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [ 2, 4 ]
> > +    description: Number of data lanes on the csi bus
> 
> There is already data-lanes in Documentation/devicetree/bindings/media/video-
> interfaces.yaml. AFAICS these two are identical. Can't the video-
> interface.yaml be used for this? I'm no expert TBH.

This is the number of data lanes that the Unicam instance supports.
There are two Unicam instances, and they can have 2 or 4 data lanes
depending on the SoC. The data-lanes endpoint property indicates the
number of lanes used on a particular board.

-- 
Regards,

Laurent Pinchart