[PATCH 4/4] habanalabs: set max power on device init per ASIC

[Oded Gabbay]

From: Tomer Tayar <ttayar@xxxxxxxxx>

For current devices there is a need to send the max power value to F/W
during device init, for example because there might be several card
types.
In future devices, this info will be programmed in the device's EEPROM
and will be read by F/W, and hence the driver should not send it.

Modify the sending of the relevant message to be done only for ASIC
types that need it.

Signed-off-by: Tomer Tayar <ttayar@xxxxxxxxx>
Reviewed-by: Oded Gabbay <ogabbay@xxxxxxxxxx>
Signed-off-by: Oded Gabbay <ogabbay@xxxxxxxxxx>
---
 drivers/misc/habanalabs/common/device.c     | 3 ++-
 drivers/misc/habanalabs/common/habanalabs.h | 2 ++
 drivers/misc/habanalabs/gaudi/gaudi.c       | 2 ++
 drivers/misc/habanalabs/goya/goya.c         | 2 ++
 4 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c
index 63e2449ad136..8ea9dfe3f79b 100644
--- a/drivers/misc/habanalabs/common/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -1541,7 +1541,8 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
 	/* Need to call this again because the max power might change,
 	 * depending on card type for certain ASICs
 	 */
-	hl_fw_set_max_power(hdev);
+	if (hdev->asic_prop.set_max_power_on_device_init)
+		hl_fw_set_max_power(hdev);
 
 	/*
 	 * hl_hwmon_init() must be called after device_late_init(), because only
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 93116fe71ef6..b5055ab528b8 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -562,6 +562,7 @@ struct hl_hints_range {
  *                              to the fact that training runs on multiple
  *                              devices)
  * @configurable_stop_on_err: is stop-on-error option configurable via debugfs.
+ * @set_max_power_on_device_init: true if need to set max power in F/W on device init.
  */
 struct asic_fixed_properties {
 	struct hw_queue_properties	*hw_queues_props;
@@ -646,6 +647,7 @@ struct asic_fixed_properties {
 	u8				supports_soft_reset;
 	u8				allow_inference_soft_reset;
 	u8				configurable_stop_on_err;
+	u8				set_max_power_on_device_init;
 };
 
 /**
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 61aa6dce6dde..ad640a268a3c 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -671,6 +671,8 @@ static int gaudi_set_fixed_properties(struct hl_device *hdev)
 
 	prop->configurable_stop_on_err = true;
 
+	prop->set_max_power_on_device_init = true;
+
 	return 0;
 }
 
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index c8143b6616af..c08d96e43c9f 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -485,6 +485,8 @@ int goya_set_fixed_properties(struct hl_device *hdev)
 
 	prop->configurable_stop_on_err = true;
 
+	prop->set_max_power_on_device_init = true;
+
 	return 0;
 }
 
-- 
2.25.1