Re: [PATCH 09/12] ARM: dts: sti: move usb picophy nodes out of soc in stih410.dtsi

[Patrice CHOTARD]

Hi Alain

On 12/2/21 08:51, Alain Volmat wrote:
> Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section.
> Since they are controlled via syscfg, there is no reg property needed,
> which is required when having the node within the soc section.
> 
> Signed-off-by: Alain Volmat <avolmat@xxxxxx>
> ---
>  arch/arm/boot/dts/stih410.dtsi | 42 ++++++++++++++++------------------
>  1 file changed, 20 insertions(+), 22 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index fe83d9a522bf..ce2f62cf129b 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -12,31 +12,29 @@ aliases {
>  		bdisp0 = &bdisp0;
>  	};
>  
> -	soc {
> -		usb2_picophy1: phy2@0 {
> -			compatible = "st,stih407-usb2-phy";
> -			reg = <0 0>;
> -			#phy-cells = <0>;
> -			st,syscfg = <&syscfg_core 0xf8 0xf4>;
> -			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> -				 <&picophyreset STIH407_PICOPHY0_RESET>;
> -			reset-names = "global", "port";
> +	usb2_picophy1: phy2 {
> +		compatible = "st,stih407-usb2-phy";
> +		#phy-cells = <0>;
> +		st,syscfg = <&syscfg_core 0xf8 0xf4>;
> +		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> +			 <&picophyreset STIH407_PICOPHY0_RESET>;
> +		reset-names = "global", "port";
> +
> +		status = "disabled";
> +	};
>  
> -			status = "disabled";
> -		};
> +	usb2_picophy2: phy3 {
> +		compatible = "st,stih407-usb2-phy";
> +		#phy-cells = <0>;
> +		st,syscfg = <&syscfg_core 0xfc 0xf4>;
> +		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> +			 <&picophyreset STIH407_PICOPHY1_RESET>;
> +		reset-names = "global", "port";
>  
> -		usb2_picophy2: phy3@0 {
> -			compatible = "st,stih407-usb2-phy";
> -			reg = <0 0>;
> -			#phy-cells = <0>;
> -			st,syscfg = <&syscfg_core 0xfc 0xf4>;
> -			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
> -				 <&picophyreset STIH407_PICOPHY1_RESET>;
> -			reset-names = "global", "port";
> -
> -			status = "disabled";
> -		};
> +		status = "disabled";
> +	};
>  
> +	soc {
>  		ohci0: usb@9a03c00 {
>  			compatible = "st,st-ohci-300x";
>  			reg = <0x9a03c00 0x100>;
Reviewed-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>

Thanks
Patrice