Re: [PATCH] arm64: dts: fsl-ls1028a: add dspi2 support

[Shawn Guo]

On Tue, Feb 08, 2022 at 12:26:10PM +0800, Changming Huang wrote:
> Enable MikroBUS SPI port.
> 
> Signed-off-by: Jianchao Wang <jianchao.wang@xxxxxxx>
> Signed-off-by: Changming Huang <jerry.huang@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 68c31cb8eead..af2c7eb07eaf 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -93,6 +93,19 @@ simple-audio-card,codec {
>  	};
>  };
>  
> +&dspi2 {

Sort the labeling node alphabetically.

> +	bus-num = <2>;
> +	status = "okay";
> +
> +	mikrobus@0 {
> +		compatible = "semtech,sx1301";

Did you run dtbs_check?

Shawn

> +		reg = <0>;
> +		spi-max-frequency = <2000000>;
> +		fsl,spi-cs-sck-delay = <1000000>;
> +		fsl,spi-sck-cs-delay = <50>;
> +	};
> +};
> +
>  &can0 {
>  	status = "okay";
>  
> -- 
> 2.25.1
>