[PATCH 5.10 097/116] usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition

[Greg Kroah-Hartman]

From: Adam Ford <aford173@xxxxxxxxx>

commit 459702eea6132888b5c5b64c0e9c626da4ec2493 upstream.

The support the external role switch a variety of situations were
addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE
leaves the host up which can cause some error messages when
switching from host to none, to gadget, to none, and then back
to host again.

 xhci-hcd ee000000.usb: Abort failed to stop command ring: -110
 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead
 xhci-hcd ee000000.usb: HC died; cleaning up
 usb 4-1: device not accepting address 6, error -108
 usb usb4-port1: couldn't allocate usb_device

After this happens it will not act as a host again.
Fix this by releasing the host mode when transitioning to USB_ROLE_NONE.

Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/gadget/udc/renesas_usb3.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2378,6 +2378,8 @@ static void handle_ext_role_switch_state
 	switch (role) {
 	case USB_ROLE_NONE:
 		usb3->connection_state = USB_ROLE_NONE;
+		if (cur_role == USB_ROLE_HOST)
+			device_release_driver(host);
 		if (usb3->driver)
 			usb3_disconnect(usb3);
 		usb3_vbus_out(usb3, false);