Re: [PATCH] drm/msm: populate intf_audio_select() base on hardware capability

From: Dmitry Baryshkov
Date: Mon Feb 14 2022 - 16:01:34 EST


On 14/02/2022 20:55, Kuogee Hsieh wrote:

On 2/11/2022 3:36 PM, Dmitry Baryshkov wrote:
On Sat, 12 Feb 2022 at 02:23, Kuogee Hsieh<quic_khsieh@xxxxxxxxxxx> wrote:
intf_audio_select() callback function use to configure
HDMI_DP_CORE_SELECT to decide audio output routes to HDMI or DP
interface. HDMI is obsoleted at newer chipset. To keep supporting
legacy hdmi application, intf_audio_select call back function have
to be populated base on hardware chip capability where legacy
chipsets have has_audio_select flag set to true.

Signed-off-by: Kuogee Hsieh<quic_khsieh@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 ++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 9 ++++++---
3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 272b14b..23680e7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -201,6 +201,7 @@ static const struct dpu_caps sdm845_dpu_caps = {
.has_dim_layer = true,
.has_idle_pc = true,
.has_3d_merge = true,
+ .has_audio_select = true,
.max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
.max_hdeci_exp = MAX_HORZ_DECIMATION,
@@ -229,6 +230,7 @@ static const struct dpu_caps sm8150_dpu_caps = {
.has_dim_layer = true,
.has_idle_pc = true,
.has_3d_merge = true,
+ .has_audio_select = true,
.max_linewidth = 4096,
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
.max_hdeci_exp = MAX_HORZ_DECIMATION,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index e5a96d6..b33f91b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -357,6 +357,7 @@ struct dpu_caps {
bool has_dim_layer;
bool has_idle_pc;
bool has_3d_merge;
+ bool has_audio_select;
I'd suggest adding a bit to dpu_mdp_cfg's features instead, following
the example of other hardware blocks.

it may cause mis leading if we put this in hardware level since MDP_HDMI_DP_SELECT  bit has not be connected

to logic for a while even it still present at ipcat. Also this bit but will be  removed at next release.

I'm sorry, I can't quite catch you. Why would you like to remove this bit at the next release?


Is dpu_caps level more proper than in hardware feature level?

A priciple of the least surprise. In other hardware-dependent virtual functions selection we use block's caps->features rather than boolean flags.



/* SSPP limits */
u32 max_linewidth;
u32 pixel_ram_size;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index 282e3c6..e608f4d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -261,14 +261,17 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
}

static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
- unsigned long cap)
+ unsigned long cap,
+ const struct dpu_mdss_cfg *m)
{
ops->setup_split_pipe = dpu_hw_setup_split_pipe;
ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
ops->get_danger_status = dpu_hw_get_danger_status;
ops->setup_vsync_source = dpu_hw_setup_vsync_source;
ops->get_safe_status = dpu_hw_get_safe_status;
- ops->intf_audio_select = dpu_hw_intf_audio_select;
+
+ if (m->caps->has_audio_select)
+ ops->intf_audio_select = dpu_hw_intf_audio_select;
}

static const struct dpu_mdp_cfg *_top_offset(enum dpu_mdp mdp,
@@ -320,7 +323,7 @@ struct dpu_hw_mdp *dpu_hw_mdptop_init(enum dpu_mdp idx,
*/
mdp->idx = idx;
mdp->caps = cfg;
- _setup_mdp_ops(&mdp->ops, mdp->caps->features);
+ _setup_mdp_ops(&mdp->ops, mdp->caps->features, m);

return mdp;
}


--
With best wishes
Dmitry