[PATCH V6 6/6] arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp

[Satya Priya]

Add pm8008_infra and pm8008_regulators support for sc7280 idp.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V2:
 - As per Stephen's comments, replaced '_' with '-' for node names.

Changes in V3:
 - Changed the regulator node names as l1, l2 etc
 - Changed "pm8008-regulators" to "regulators"
 - Changed "qcom,min-dropout-voltage" to "regulator-min-dropout-voltage-microvolt"

Changes in V4:
 - Moved all common stuff to pm8008.dtsi and added board specific configurations here.

Changes in V5:
 - Changed the node names as per pm8008.dtsi
 - Moved supply nodes to chip level (mfd node).
 - Removed the regulator-mindropout property.

Changes in V6:
 - No changes.

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 ++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b8..371ad19 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -263,6 +263,62 @@
 	};
 };
 
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	#include "pm8008.dtsi"
+};
+
+&pm8008_infra {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8008_active>;
+};
+
+&pm8008_regulators {
+	vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+	vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+	vdd_l5-supply = <&vreg_bob>;
+	vdd_l6-supply = <&vreg_bob>;
+	vdd_l7-supply = <&vreg_bob>;
+};
+
+&pm8008_l1 {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <1300000>;
+};
+
+&pm8008_l2 {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <1250000>;
+};
+
+&pm8008_l3 {
+	regulator-min-microvolt = <1650000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l4 {
+	regulator-min-microvolt = <1504000>;
+	regulator-max-microvolt = <1600000>;
+};
+
+&pm8008_l5 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l6 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l7 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3544000>;
+};
+
 &qfprom {
 	vcc-supply = <&vreg_l1c_1p8>;
 };
@@ -375,6 +431,16 @@
 	drive-strength = <2>;
 };
 
+&pm8350c_gpios {
+	pm8008_active: pm8008_active {
+		pins = "gpio4";
+		function = "normal";
+		bias-disable;
+		output-high;
+		power-source = <0>;
+	};
+};
+
 &qspi_cs0 {
 	bias-disable;
 };
-- 
2.7.4