[PATCH v2 7/7] clk: qcom: Add SDX65 APCS clock controller support

[Rohit Agarwal]

Add a driver config support for the SDX65 APCS clock controller. It is part
of the APCS hardware block, which among other things implements a combined
mux and half integer divider functionality. The APCS clock controller has 3
parent clocks:

1. Board XO
2. Fixed rate GPLL0
3. A7 PLL

This is required for enabling CPU frequency scaling on SDX65-based
platforms.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
 drivers/clk/qcom/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 10d75d3..05abf78 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -55,13 +55,13 @@ config QCOM_CLK_APCC_MSM8996
 	  drivers for dynamic power management.
 
 config QCOM_CLK_APCS_SDX55
-	tristate "SDX55 APCS Clock Controller"
+	tristate "SDX55 and SDX65 APCS Clock Controller"
 	depends on QCOM_APCS_IPC || COMPILE_TEST
 	help
-	  Support for the APCS Clock Controller on SDX55 platform. The
+	  Support for the APCS Clock Controller on SDX55, SDX65 platform. The
 	  APCS is managing the mux and divider which feeds the CPUs.
 	  Say Y if you want to support CPU frequency scaling on devices
-	  such as SDX55.
+	  such as SDX55, SDX65.
 
 config QCOM_CLK_RPM
 	tristate "RPM based Clock Controller"
-- 
2.7.4