[PATCH AUTOSEL 5.16 03/34] phy: usb: Leave some clocks running during suspend

From: Sasha Levin
Date: Tue Feb 15 2022 - 10:27:12 EST


From: Al Cooper <alcooperx@xxxxxxxxx>

[ Upstream commit 42fed57046fc74586d7058bd51a1c10ac9c690cb ]

The PHY client driver does a phy_exit() call on suspend or rmmod and
the PHY driver needs to know the difference because some clocks need
to be kept running for suspend but can be shutdown on unbind/rmmod
(or if there are no PHY clients at all).

The fix is to use a PM notifier so the driver can tell if a PHY
client is calling exit() because of a system suspend or a driver
unbind/rmmod.

Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@xxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/phy/broadcom/phy-brcm-usb.c | 38 +++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)

diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 116fb23aebd99..0f1deb6e0eabf 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -18,6 +18,7 @@
#include <linux/soc/brcmstb/brcmstb.h>
#include <dt-bindings/phy/phy.h>
#include <linux/mfd/syscon.h>
+#include <linux/suspend.h>

#include "phy-brcm-usb-init.h"

@@ -70,12 +71,35 @@ struct brcm_usb_phy_data {
int init_count;
int wake_irq;
struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX];
+ struct notifier_block pm_notifier;
+ bool pm_active;
};

static s8 *node_reg_names[BRCM_REGS_MAX] = {
"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
};

+static int brcm_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event,
+ void *unused)
+{
+ struct brcm_usb_phy_data *priv =
+ container_of(notifier, struct brcm_usb_phy_data, pm_notifier);
+
+ switch (pm_event) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ priv->pm_active = true;
+ break;
+ case PM_POST_RESTORE:
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ priv->pm_active = false;
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
{
struct phy *gphy = dev_id;
@@ -91,6 +115,9 @@ static int brcm_usb_phy_init(struct phy *gphy)
struct brcm_usb_phy_data *priv =
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);

+ if (priv->pm_active)
+ return 0;
+
/*
* Use a lock to make sure a second caller waits until
* the base phy is inited before using it.
@@ -120,6 +147,9 @@ static int brcm_usb_phy_exit(struct phy *gphy)
struct brcm_usb_phy_data *priv =
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);

+ if (priv->pm_active)
+ return 0;
+
dev_dbg(&gphy->dev, "EXIT\n");
if (phy->id == BRCM_USB_PHY_2_0)
brcm_usb_uninit_eohci(&priv->ini);
@@ -488,6 +518,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
if (err)
return err;

+ priv->pm_notifier.notifier_call = brcm_pm_notifier;
+ register_pm_notifier(&priv->pm_notifier);
+
mutex_init(&priv->mutex);

/* make sure invert settings are correct */
@@ -528,7 +561,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)

static int brcm_usb_phy_remove(struct platform_device *pdev)
{
+ struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev);
+
sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
+ unregister_pm_notifier(&priv->pm_notifier);

return 0;
}
@@ -539,6 +575,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);

if (priv->init_count) {
+ dev_dbg(dev, "SUSPEND\n");
priv->ini.wake_enabled = device_may_wakeup(dev);
if (priv->phys[BRCM_USB_PHY_3_0].inited)
brcm_usb_uninit_xhci(&priv->ini);
@@ -578,6 +615,7 @@ static int brcm_usb_phy_resume(struct device *dev)
* Uninitialize anything that wasn't previously initialized.
*/
if (priv->init_count) {
+ dev_dbg(dev, "RESUME\n");
if (priv->wake_irq >= 0)
disable_irq_wake(priv->wake_irq);
brcm_usb_init_common(&priv->ini);
--
2.34.1