Re: [PATCH 12/15] arm64: dts: qcom: Add SDM632 device tree

From: Bjorn Andersson
Date: Tue Feb 15 2022 - 11:31:45 EST


On Wed 12 Jan 13:41 CST 2022, Luca Weiss wrote:

> From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
>
> Snapdragon 632 is based on msm8953, add the devicee tree for that.
>

The commit message is a little bit thin on details about the change.

> Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm632.dtsi | 125 +++++++++++++++++++++++++++
> 1 file changed, 125 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm632.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
> new file mode 100644
> index 000000000000..b80ba8a5ef3f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
> @@ -0,0 +1,125 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
> +
> +#include "msm8953.dtsi"
> +
> +/ {
> + thermal-zones {
> + /delete-node/cpu0-thermal;

Below you replace cpu[4-7]-thermal. What about cpu[0-3]-thermal? And I
would prefer the answer to be documented in the commit message.

Regards,
Bjorn

> + /delete-node/cpu1-thermal;
> + /delete-node/cpu2-thermal;
> + /delete-node/cpu3-thermal;
> + /delete-node/cpu4-thermal;
> + /delete-node/cpu5-thermal;
> + /delete-node/cpu6-thermal;
> + /delete-node/cpu7-thermal;
> + cpu4-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> + thermal-sensors = <&tsens0 5>;
> + trips {
> + cpu4_alert: trip-point0 {
> + temperature = <80000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu4_crit: crit {
> + temperature = <100000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu4_alert>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + cpu5-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> + thermal-sensors = <&tsens0 6>;
> + trips {
> + cpu5_alert: trip-point0 {
> + temperature = <80000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu5_crit: crit {
> + temperature = <100000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu5_alert>;
> + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + cpu6-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> + thermal-sensors = <&tsens0 7>;
> + trips {
> + cpu6_alert: trip-point0 {
> + temperature = <80000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu6_crit: crit {
> + temperature = <100000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu6_alert>;
> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + cpu7-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> + thermal-sensors = <&tsens0 8>;
> + trips {
> + cpu7_alert: trip-point0 {
> + temperature = <80000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu7_crit: crit {
> + temperature = <100000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&cpu7_alert>;
> + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +};
> +
> +&CPU4 {
> + capacity-dmips-mhz = <1980>;
> +};
> +
> +&CPU5 {
> + capacity-dmips-mhz = <1980>;
> +};
> +
> +&CPU6 {
> + capacity-dmips-mhz = <1980>;
> +};
> +
> +&CPU7 {
> + capacity-dmips-mhz = <1980>;
> +};
> --
> 2.34.1
>