[PATCH v2 6/8] arm64: dts: qcom: ipq6018: Fix qmp usb3 phy node

[Bhupesh Sharma]

Fix the following 'make dtbs_check' warning(s) by
using phy@ instead of lanes@ and by moving '#clock-names' to
sub-node:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: ssphy@78000:
 'lane@78200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 66ec5615651d..ad7914e49532 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -674,7 +674,6 @@ ssphy_0: ssphy@78000 {
 			reg = <0x0 0x78000 0x0 0x1C4>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			#clock-cells = <1>;
 			ranges;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
@@ -686,12 +685,13 @@ ssphy_0: ssphy@78000 {
 			reset-names = "phy","common";
 			status = "disabled";
 
-			usb0_ssphy: lane@78200 {
+			usb0_ssphy: phy@78200 {
 				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
 				      <0x0 0x00078400 0x0 0x200>, /* Rx */
 				      <0x0 0x00078800 0x0 0x1F8>, /* PCS */
 				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
 				#phy-cells = <0>;
+				#clock-cells = <1>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
 				clock-names = "pipe0";
 				clock-output-names = "gcc_usb0_pipe_clk_src";
-- 
2.35.1