[PATCH v1 3/5] arm64: dts: imx8mq-librem5: higher boost regulation current

[Martin Kepplinger]

From: Guido Günther <agx@xxxxxxxxxxx>

1,5A is what's used by the type-c controller on the Librem 5 board so
increase ti,boost-max-current to 1,5A too.

Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index b7d9edc1358b..a0c8191bd33c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1098,7 +1098,7 @@ bq25895: charger@6a {
 		ti,precharge-current = <130000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
-		ti,boost-max-current = <500000>; /* uA */
+		ti,boost-max-current = <1500000>; /* uA */
 		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
 		ti,vinmin-threshold = <3900000>; /* uV */
 		monitored-battery = <&bat>;
-- 
2.30.2