Re: [PATCH v8 1/2] dt-bindings: arm: Add OP-TEE transport for SCMI

From: Etienne Carriere
Date: Tue Mar 01 2022 - 09:12:01 EST

Hi sorry,

I sent the mail while i was still typing it...
Here is with the full answer.


On Tue, 1 Mar 2022 at 15:05, Etienne Carriere
<etienne.carriere@xxxxxxxxxx> wrote:
>
> Hello Ahmad,
>
> On Mon, 28 Feb 2022 at 17:01, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
> >
> > Hello Etienne,
> >
> > On 28.10.21 16:00, Etienne Carriere wrote:
> > > Introduce compatible "linaro,scmi-optee" for SCMI transport channel
> > > based on an OP-TEE service invocation. The compatible mandates a
> > > channel ID defined with property "linaro,optee-channel-id".
> >
> > I just found this thread via the compatible in the STM32MP131 patch set:
> > https://lore.kernel.org/all/20220225133137.813919-1-gabriel.fernandez@xxxxxxxxxxx/
> >
> > Linux doesn't care whether PSCI is provided by TF-A, OP-TEE or something
> > else, so there is just the arm,psci* compatible.
> >
> > What's different about SCMI that this is not possible? Why couldn't the
> > existing binding and driver be used to communicate with OP-TEE as secure
> > monitor as well?
>
> Compatible "linaro,scmi-optee" denote a alternate SCMI transport to
> those already in v5.16.

It is names scmi-optee because the interface exposed to access SCMI services is
based on TEE's interface (UUID to open a session with and invoke commands).

The compatible is described in the Linux Documentation but not yet
merged in the linux-next.
It can be found in the tree of arm_scmi driver maintainers:
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/log/?h=for-linux-next

This commit:
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/commit/?h=for-linux-next&id=b7d2cf7c817b86e705b97f72c6be192a6760a14f

Br,
Etienne

>
>
> >
> > Cheers,
> > Ahmad
> >
> > >
> > > Cc: devicetree@xxxxxxxxxxxxxxx
> > > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > > Signed-off-by: Etienne Carriere <etienne.carriere@xxxxxxxxxx>
> > > ---
> > > Changes since v6:
> > > - Remove maxItems from linaro,optee-channel-id description
> > >
> > > No change since v5
> > >
> > > Changes since v4:
> > > - Fix sram node name in DTS example: s/-shm-/-sram-/
> > >
> > > Changes since v3:
> > > - Add description for linaro,optee-channel-id in patternProperties
> > > specifying protocol can optionaly define a dedicated channel id.
> > > - Fix DTS example (duplicated phandles issue, subnodes ordering)
> > > - Fix typo in DTS example and description comments.
> > >
> > > Changes since v2:
> > > - Define mandatory property linaro,optee-channel-id
> > > - Rebased on yaml description file
> > >
> > > Changes since v1:
> > > - Removed modification regarding mboxes property description.
> > > ---
> > > .../bindings/firmware/arm,scmi.yaml | 65 +++++++++++++++++++
> > > 1 file changed, 65 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > index 5c4c6782e052..eae15df36eef 100644
> > > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> > > @@ -38,6 +38,9 @@ properties:
> > > The virtio transport only supports a single device.
> > > items:
> > > - const: arm,scmi-virtio
> > > + - description: SCMI compliant firmware with OP-TEE transport
> > > + items:
> > > + - const: linaro,scmi-optee
> > >
> > > interrupts:
> > > description:
> > > @@ -83,6 +86,11 @@ properties:
> > > description:
> > > SMC id required when using smc or hvc transports
> > >
> > > + linaro,optee-channel-id:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description:
> > > + Channel specifier required when using OP-TEE transport.
> > > +
> > > protocol@11:
> > > type: object
> > > properties:
> > > @@ -195,6 +203,12 @@ patternProperties:
> > > minItems: 1
> > > maxItems: 2
> > >
> > > + linaro,optee-channel-id:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description:
> > > + Channel specifier required when using OP-TEE transport and
> > > + protocol has a dedicated communication channel.
> > > +
> > > required:
> > > - reg
> > >
> > > @@ -226,6 +240,16 @@ else:
> > > - arm,smc-id
> > > - shmem
> > >
> > > + else:
> > > + if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + const: linaro,scmi-optee
> > > + then:
> > > + required:
> > > + - linaro,optee-channel-id
> > > +
> > > examples:
> > > - |
> > > firmware {
> > > @@ -340,7 +364,48 @@ examples:
> > > reg = <0x11>;
> > > #power-domain-cells = <1>;
> > > };
> > > + };
> > > + };
> > > +
> > > + - |
> > > + firmware {
> > > + scmi {
> > > + compatible = "linaro,scmi-optee";
> > > + linaro,optee-channel-id = <0>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + scmi_dvfs1: protocol@13 {
> > > + reg = <0x13>;
> > > + linaro,optee-channel-id = <1>;
> > > + shmem = <&cpu_optee_lpri0>;
> > > + #clock-cells = <1>;
> > > + };
> > > +
> > > + scmi_clk0: protocol@14 {
> > > + reg = <0x14>;
> > > + #clock-cells = <1>;
> > > + };
> > > + };
> > > + };
> > >
> > > + soc {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > +
> > > + sram@51000000 {
> > > + compatible = "mmio-sram";
> > > + reg = <0x0 0x51000000 0x0 0x10000>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges = <0 0x0 0x51000000 0x10000>;
> > > +
> > > + cpu_optee_lpri0: optee-sram-section@0 {
> > > + compatible = "arm,scmi-shmem";
> > > + reg = <0x0 0x80>;
> > > + };
> > > };
> > > };
> > >
> >
> >
> > --
> > Pengutronix e.K. | |
> > Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |