Re: [PATCH 7/8] clk: qcom: gcc-sm8150: use runtime PM for the clock controller

[Bhupesh Sharma]

HI Bjorn,

Thanks for the review. Sorry for the late reply.

On Tue, 1 Feb 2022 at 05:31, Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> wrote:
>
> On Wed 26 Jan 16:17 CST 2022, Bhupesh Sharma wrote:
>
> > On sm8150 emac clk registers are powered up by the GDSC power
> > domain. Use runtime PM calls to make sure that required power domain is
> > powered on while we access clock controller's registers.
> >
>
> Typically the GCC registers need only "cx" enabled for us to much around
> with its registers and I don't see you add any references to additional
> resources, so can you please elaborate on how this affects the state of
> the system to enable you to operate the emac registers?

Indeed. On second thought and further tests, I think we don't need
this change. Only keeping EMAC GDSC in ON state (always) should fix
the issue (added via [PATCH 8/8] in this series).

So, I will drop this from v2.

Regards,
Bhupesh

> > Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> >  drivers/clk/qcom/gcc-sm8150.c | 27 +++++++++++++++++++++++++--
> >  1 file changed, 25 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
> > index ada755ad55f7..2e71afed81fd 100644
> > --- a/drivers/clk/qcom/gcc-sm8150.c
> > +++ b/drivers/clk/qcom/gcc-sm8150.c
> > @@ -5,6 +5,7 @@
> >  #include <linux/bitops.h>
> >  #include <linux/err.h>
> >  #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/of_device.h>
> > @@ -3792,19 +3793,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = {
> >  };
> >  MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table);
> >
> > +static void gcc_sm8150_pm_runtime_disable(void *data)
> > +{
> > +     pm_runtime_disable(data);
> > +}
> > +
> >  static int gcc_sm8150_probe(struct platform_device *pdev)
> >  {
> >       struct regmap *regmap;
> > +     int ret;
> > +
> > +     pm_runtime_enable(&pdev->dev);
> > +
> > +     ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev);
> > +     if (ret)
> > +             return ret;
> > +
> > +     ret = pm_runtime_resume_and_get(&pdev->dev);
> > +     if (ret)
> > +             return ret;
> >
> >       regmap = qcom_cc_map(pdev, &gcc_sm8150_desc);
> > -     if (IS_ERR(regmap))
> > +     if (IS_ERR(regmap)) {
> > +             pm_runtime_put(&pdev->dev);
> >               return PTR_ERR(regmap);
> > +     }
> >
> >       /* Disable the GPLL0 active input to NPU and GPU via MISC registers */
> >       regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
> >       regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
> >
> > -     return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap);
> > +     ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap);
> > +
> > +     pm_runtime_put(&pdev->dev);
> > +
> > +     return ret;
> >  }
> >
> >  static struct platform_driver gcc_sm8150_driver = {
> > --
> > 2.34.1
> >