RE: [PATCH v8 2/2] clocksource: Add Intel Keem Bay timer support

[Sanil, Shruthi]

> -----Original Message-----
> From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> Sent: Wednesday, March 2, 2022 2:39 AM
> To: Sanil, Shruthi <shruthi.sanil@xxxxxxxxx>; tglx@xxxxxxxxxxxxx;
> robh+dt@xxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx
> Cc: andriy.shevchenko@xxxxxxxxxxxxxxx; mgross@xxxxxxxxxxxxxxx; Thokala,
> Srikanth <srikanth.thokala@xxxxxxxxx>; Raja Subramanian, Lakshmi Bai
> <lakshmi.bai.raja.subramanian@xxxxxxxxx>; Sangannavar, Mallikarjunappa
> <mallikarjunappa.sangannavar@xxxxxxxxx>
> Subject: Re: [PATCH v8 2/2] clocksource: Add Intel Keem Bay timer support
> 
> On 22/02/2022 10:56, shruthi.sanil@xxxxxxxxx wrote:
> > From: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>
> >
> > The Intel Keem Bay timer driver supports clocksource and clockevent
> > features for the timer IP used in Intel Keem Bay SoC.
> > The timer block supports 1 free running counter and 8 timers.
> > The free running counter can be used as a clocksource and the timers
> > can be used as clockevent. Each timer is capable of generating
> > individual interrupt.
> > Both the features are enabled through the timer general config register.
> >
> > Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
> > Signed-off-by: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>
> > ---
> >   MAINTAINERS                         |   6 +
> >   drivers/clocksource/Kconfig         |  11 ++
> >   drivers/clocksource/Makefile        |   1 +
> >   drivers/clocksource/timer-keembay.c | 230
> ++++++++++++++++++++++++++++
> >   4 files changed, 248 insertions(+)
> >   create mode 100644 drivers/clocksource/timer-keembay.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index
> > 777cd6fa2b3d..73c0029dcdf7 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -9796,6 +9796,12 @@ F:	drivers/crypto/keembay/keembay-ocs-hcu-
> core.c
> >   F:	drivers/crypto/keembay/ocs-hcu.c
> >   F:	drivers/crypto/keembay/ocs-hcu.h
> >
> > +INTEL KEEM BAY TIMER DRIVER
> > +M:	Shruthi Sanil <shruthi.sanil@xxxxxxxxx>
> > +S:	Maintained
> > +F:	Documentation/devicetree/bindings/timer/intel,keembay-
> timer.yaml
> > +F:	drivers/clocksource/timer-keembay.c
> > +
> >   INTEL THUNDER BAY EMMC PHY DRIVER
> >   M:	Nandhini Srikandan <nandhini.srikandan@xxxxxxxxx>
> >   M:	Rashmi A <rashmi.a@xxxxxxxxx>
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > index cfb8ea0df3b1..65b6cf916e5a 100644
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -721,4 +721,15 @@ config MICROCHIP_PIT64B
> >   	  modes and high resolution. It is used as a clocksource
> >   	  and a clockevent.
> >
> > +config KEEMBAY_TIMER
> > +	bool "Intel Keem Bay timer"
> > +	depends on ARCH_KEEMBAY || COMPILE_TEST
> > +	select TIMER_OF
> > +	help
> > +	  This option enables the support for the Intel Keem Bay
> > +	  general purpose timer and free running counter driver.
> > +	  Each timer can generate an individual interrupt and
> > +	  supports oneshot and periodic modes.
> > +	  The 64-bit counter can be used as a clock source.
> > +
> >   endmenu
> > diff --git a/drivers/clocksource/Makefile
> > b/drivers/clocksource/Makefile index fa5f624eadb6..dff6458ef9e5 100644
> > --- a/drivers/clocksource/Makefile
> > +++ b/drivers/clocksource/Makefile
> > @@ -89,3 +89,4 @@ obj-$(CONFIG_GX6605S_TIMER)		+=
> timer-gx6605s.o
> >   obj-$(CONFIG_HYPERV_TIMER)		+= hyperv_timer.o
> >   obj-$(CONFIG_MICROCHIP_PIT64B)		+= timer-microchip-pit64b.o
> >   obj-$(CONFIG_MSC313E_TIMER)		+= timer-msc313e.o
> > +obj-$(CONFIG_KEEMBAY_TIMER)		+= timer-keembay.o
> > diff --git a/drivers/clocksource/timer-keembay.c
> > b/drivers/clocksource/timer-keembay.c
> > new file mode 100644
> > index 000000000000..230609c06a26
> > --- /dev/null
> > +++ b/drivers/clocksource/timer-keembay.c
> > @@ -0,0 +1,230 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Intel Keem Bay Timer driver
> > + *
> > + * Copyright (C) 2020 Intel Corporation  */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io-64-nonatomic-lo-hi.h> #include
> > +<linux/mfd/syscon.h> #include <linux/module.h> #include
> > +<linux/of_address.h> #include <linux/sizes.h> #include <linux/slab.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "timer-of.h"
> > +
> > +/* Timer register offset */
> > +#define TIM_CNT_VAL_OFFSET		0x0
> > +#define TIM_RELOAD_VAL_OFFSET		0x4
> > +#define TIM_CONFIG_OFFSET		0x8
> > +
> > +/* Bit fields of timer general config register */
> > +#define TIM_CONFIG_PRESCALER_ENABLE	BIT(2)
> > +#define TIM_CONFIG_COUNTER_ENABLE	BIT(0)
> > +
> > +/* Bit fields of timer config register */
> > +#define TIM_CONFIG_INTERRUPT_PENDING	BIT(4)
> > +#define TIM_CONFIG_INTERRUPT_ENABLE	BIT(2)
> > +#define TIM_CONFIG_RESTART		BIT(1)
> > +#define TIM_CONFIG_ENABLE		BIT(0)
> > +
> > +#define TIM_GEN_MASK			GENMASK(31, 12)
> > +#define TIM_RATING			200
> > +#define TIM_CLKSRC_MASK_BITS		64
> > +
> > +#define TIMER_NAME_SIZE			25
> > +
> > +static inline void keembay_timer_enable(void __iomem *base, u32
> > +flags) {
> > +	writel(TIM_CONFIG_ENABLE | flags, base + TIM_CONFIG_OFFSET); }
> > +
> > +static inline void keembay_timer_disable(void __iomem *base) {
> > +	writel(0x0, base + TIM_CONFIG_OFFSET); }
> > +
> > +static inline void keembay_timer_update_counter(void __iomem *base,
> > +u32 val) {
> > +	writel(val, base + TIM_CNT_VAL_OFFSET);
> > +	writel(val, base + TIM_RELOAD_VAL_OFFSET); }
> > +
> > +static inline void keembay_timer_clear_pending_int(void __iomem
> > +*base) {
> > +	u32 val;
> > +
> > +	val = readl(base + TIM_CONFIG_OFFSET);
> > +	val &= ~TIM_CONFIG_INTERRUPT_PENDING;
> > +	writel(val, base + TIM_CONFIG_OFFSET); }
> > +
> > +static int keembay_timer_set_next_event(unsigned long evt, struct
> > +clock_event_device *ce) {
> > +	u32 flags = TIM_CONFIG_INTERRUPT_ENABLE;
> > +	struct timer_of *to = to_timer_of(ce);
> > +	void __iomem *tim_base = timer_of_base(to);
> > +
> > +	keembay_timer_disable(tim_base);
> > +	keembay_timer_update_counter(tim_base, evt);
> > +	keembay_timer_enable(tim_base, flags);
> > +
> > +	return 0;
> > +}
> > +
> > +static int keembay_timer_periodic(struct clock_event_device *ce) {
> > +	u32 flags = TIM_CONFIG_INTERRUPT_ENABLE |
> TIM_CONFIG_RESTART;
> > +	struct timer_of *to = to_timer_of(ce);
> > +	void __iomem *tim_base = timer_of_base(to);
> > +
> > +	keembay_timer_disable(tim_base);
> > +	keembay_timer_update_counter(tim_base, timer_of_period(to));
> > +	keembay_timer_enable(tim_base, flags);
> > +
> > +	return 0;
> > +}
> > +
> > +static int keembay_timer_shutdown(struct clock_event_device *ce) {
> > +	struct timer_of *to = to_timer_of(ce);
> > +
> > +	keembay_timer_disable(timer_of_base(to));
> > +
> > +	return 0;
> > +}
> > +
> > +static irqreturn_t keembay_timer_isr(int irq, void *dev_id) {
> > +	struct clock_event_device *evt = dev_id;
> > +	struct timer_of *to = to_timer_of(evt);
> > +	void __iomem *tim_base = timer_of_base(to);
> > +	u32 val;
> > +
> > +	val = readl(tim_base + TIM_CONFIG_OFFSET);
> > +
> > +	if (val & TIM_CONFIG_RESTART) {
> > +		/* Clear interrupt for periodic timer*/
> 
> nit: comment format is:
> 
> /*
>   * my comment
>   */
> 
> One line comment format is usually for the network subsystem

OK. I'll update the comment format.

> 
> > +		keembay_timer_clear_pending_int(tim_base);
> > +	} else {
> > +		/* Disable the timer for one shot timer */
> 
> comment format

I'll update the comment format.

> 
> > +		keembay_timer_disable(tim_base);
> > +	}
> > +
> > +	evt->event_handler(evt);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int __init keembay_clockevent_init(struct device_node *np) {
> > +	struct timer_of *keembay_ce_to;
> > +	struct regmap *regmap;
> > +	int ret;
> > +	u32 val;
> > +
> > +	regmap = device_node_to_regmap(np->parent);
> > +	if (IS_ERR(regmap))
> > +		return PTR_ERR(regmap);
> > +
> > +	ret = regmap_read(regmap, TIM_CONFIG_OFFSET, &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Prescaler bit must be enabled for the timer to function */
> 
> comment format

I'll update the comment format.

> 
> > +	if (!(val & TIM_CONFIG_PRESCALER_ENABLE)) {
> > +		pr_err("%pOF: Prescaler is not enabled\n", np);
> > +		ret = -ENODEV;
> > +	}
> 
> Why bail out instead of enabling the prescalar ?

Because it is a secure register and it would be updated by the bootloader.

> 
> > +	keembay_ce_to = kzalloc(sizeof(*keembay_ce_to), GFP_KERNEL);
> > +	if (!keembay_ce_to)
> > +		ret = -ENOMEM;
> 
> As your convenience but I suggest global static variable initialization, that will
> simplify the init function regarding the error path.

Yes, I can update this to have a global static variable.
This was updated like this considering multiple timers.

> 
> > +	keembay_ce_to->flags = TIMER_OF_IRQ | TIMER_OF_BASE |
> TIMER_OF_CLOCK;
> > +	keembay_ce_to->clkevt.name = "keembay_timer";
> > +	keembay_ce_to->clkevt.cpumask = cpu_possible_mask;
> > +	keembay_ce_to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
> > +					 CLOCK_EVT_FEAT_ONESHOT  |
> > +					 CLOCK_EVT_FEAT_DYNIRQ;
> > +	keembay_ce_to->clkevt.rating = TIM_RATING;
> > +	keembay_ce_to->clkevt.set_next_event =
> keembay_timer_set_next_event;
> > +	keembay_ce_to->clkevt.set_state_periodic =
> keembay_timer_periodic;
> > +	keembay_ce_to->clkevt.set_state_shutdown =
> keembay_timer_shutdown;
> > +	keembay_ce_to->of_irq.handler = keembay_timer_isr;
> > +	keembay_ce_to->of_irq.flags = IRQF_TIMER;
> > +
> > +	ret = timer_of_init(np, keembay_ce_to);
> > +	if (ret)
> > +		goto err_keembay_ce_to_free;
> > +
> > +	ret = regmap_read(regmap, TIM_RELOAD_VAL_OFFSET, &val);
> > +	if (ret)
> > +		goto err_keembay_ce_to_free;
> > +
> > +	keembay_ce_to->of_clk.rate = keembay_ce_to->of_clk.rate / (val +
> 1);
> > +
> > +	clockevents_config_and_register(&keembay_ce_to->clkevt,
> > +					timer_of_rate(keembay_ce_to),
> > +					1,
> > +					U32_MAX);
> > +
> > +	return 0;
> > +
> > +err_keembay_ce_to_free:
> > +	kfree(keembay_ce_to);
> > +
> > +	return ret;
> > +}
> > +
> > +static struct timer_of keembay_cs_to = {
> > +	.flags	= TIMER_OF_BASE | TIMER_OF_CLOCK,
> > +};
> > +
> > +static u64 notrace keembay_clocksource_read(struct clocksource *cs) {
> > +	return lo_hi_readq(timer_of_base(&keembay_cs_to));
> > +}
> > +
> > +static struct clocksource keembay_counter = {
> > +	.name	= "keembay_sys_counter",
> > +	.rating	= TIM_RATING,
> > +	.read	= keembay_clocksource_read,
> > +	.mask	= CLOCKSOURCE_MASK(TIM_CLKSRC_MASK_BITS),
> > +	.flags	= CLOCK_SOURCE_IS_CONTINUOUS |
> > +		  CLOCK_SOURCE_SUSPEND_NONSTOP,
> > +};
> > +
> > +static int __init keembay_clocksource_init(struct device_node *np) {
> > +	struct regmap *regmap;
> > +	u32 val;
> > +	int ret;
> > +
> > +	regmap = device_node_to_regmap(np->parent);
> > +	if (IS_ERR(regmap))
> > +		return PTR_ERR(regmap);
> > +
> > +	ret = regmap_read(regmap, TIM_CONFIG_OFFSET, &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* Free Running Counter bit must be enabled for counter to function
> > +*/
> 
> comment format

I'll update the comment format.

> 
> > +	if (!(val & TIM_CONFIG_COUNTER_ENABLE)) {
> > +		pr_err("%pOF: free running counter is not enabled\n", np);
> > +		return -ENODEV;
> > +	}
> 
> Same comment as above. Why not enable the counter ?

Because it is a secure register and it would be updated by the bootloader.

> 
> Other than that, the driver is having a good shape

Thank You!

Regards,
Shruthi

> 
> 
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
> 
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-
> blog/> Blog