Re: [PATCH v2] usb:typec: Add sysfs support for Type C connector's physical location

[Heikki Krogerus]

On Tue, Mar 01, 2022 at 08:11:06PM +0100, Rafael J. Wysocki wrote:
> On Tue, Mar 1, 2022 at 7:57 PM Won Chung <wonchung@xxxxxxxxxx> wrote:
> >
> > On Tue, Mar 1, 2022 at 1:33 AM Heikki Krogerus
> > <heikki.krogerus@xxxxxxxxxxxxxxx> wrote:
> > >
> > > Hi Won,
> > >
> > > On Tue, Mar 01, 2022 at 02:26:25AM +0000, Won Chung wrote:
> > > > When ACPI table includes _PLD field for a Type C connector, share _PLD
> > > > values in its sysfs. _PLD stands for physical location of device.
> > > >
> > > > Currently without connector's location information, when there are
> > > > multiple Type C ports, it is hard to distinguish which connector
> > > > corresponds to which physical port at which location. For example, when
> > > > there are two Type C connectors, it is hard to find out which connector
> > > > corresponds to the Type C port on the left panel versus the Type C port
> > > > on the right panel. With location information provided, we can determine
> > > > which specific device at which location is doing what.
> > > >
> > > > _PLD output includes much more fields, but only generic fields are added
> > > > and exposed to sysfs, so that non-ACPI devices can also support it in
> > > > the future. The minimal generic fields needed for locating a port are
> > > > the following.
> > > > - panel
> > > > - vertical_position
> > > > - horizontal_position
> > > > - dock
> > > > - lid
> > > >
> > > > Signed-off-by: Won Chung <wonchung@xxxxxxxxxx>
> > > > ---
> > > >
> > > > Changes in v2:
> > > > - Use string for location.
> > > > - Clarify get_pld() with naming and return type.
> > > >
> > > >  Documentation/ABI/testing/sysfs-class-typec |  35 ++++++
> > > >  drivers/usb/typec/class.c                   | 113 ++++++++++++++++++++
> > > >  drivers/usb/typec/class.h                   |   3 +
> > > >  3 files changed, 151 insertions(+)
> > > >
> > > > diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec
> > > > index 75088ecad202..4497a5aeb063 100644
> > > > --- a/Documentation/ABI/testing/sysfs-class-typec
> > > > +++ b/Documentation/ABI/testing/sysfs-class-typec
> > > > @@ -141,6 +141,41 @@ Description:
> > > >               - "reverse": CC2 orientation
> > > >               - "unknown": Orientation cannot be determined.
> > > >
> > > > +What:                /sys/class/typec/<port>/location/panel
> > > > +Date:                March 2022
> > > > +Contact:     Won Chung <wonchung@xxxxxxxxxx>
> > > > +Description:
> > > > +             Describes which panel surface of the system’s housing the
> > > > +             port resides on.
> > > > +
> > > > +What:                /sys/class/typec/<port>/location/vertical_position
> > > > +Date:                March 2022
> > > > +Contact:     Won Chung <wonchung@xxxxxxxxxx>
> > > > +Description:
> > > > +             Describes vertical position of the port on the panel surface.
> > > > +             Valid values: upper, center, lower
> > > > +
> > > > +What:                /sys/class/typec/<port>/location/horizontal_position
> > > > +Date:                March 2022
> > > > +Contact:     Won Chung <wonchung@xxxxxxxxxx>
> > > > +Description:
> > > > +             Describes horizontal position of the port on the panel surface.
> > > > +             Valid values: left, center, right
> > > > +
> > > > +What:                /sys/class/typec/<port>/location/dock
> > > > +Date:                March 2022
> > > > +Contact:     Won Chung <wonchung@xxxxxxxxxx>
> > > > +Description:
> > > > +             Set as "yes" if the port resides in a docking station or a port
> > > > +             replicator, otherwise set as "no".
> > > > +
> > > > +What:                /sys/class/typec/<port>/location/lid
> > > > +Date:                March 2022
> > > > +Contact:     Won Chung <wonchung@xxxxxxxxxx>
> > > > +Description:
> > > > +             Set as "yes" if the port resides on the lid of laptop system,
> > > > +             otherwise set as "no".
> > > > +
> > >
> > > I've probable lost track of the topic during my winter break, I'm
> > > sorry about that, but why are you proposing now that this should be
> > > made Type-C specific?
> > > This information is not Type-C specific, so it definitely does not
> > > belong here.
> > >
> > > Br,
> > >
> > > --
> > > heikki
> >
> > Hi Heikki,
> >
> > Thank you for the comment. Sorry that my description was not clear.
> > This is follow up from "[PATCH v6] ACPI: device_sysfs: Add sysfs
> > support for _PLD" in which Rafael suggested to have generic location
> > in Type C connector than adding PLD specifically to ACPI device.
> 
> Well, this doesn't have to be /sys/class/typec/<port>/location/ though.
> 
> For example, the device location information can be exposed in a more
> generic way is /sys/devices/.../location/ for all devices for which it
> is available, somewhat in analogy to /sys/devices/.../power/.

Right, that's what I meant. These can be made generic.

thanks,

-- 
heikki