Re: [PATCH v3 00/14] Move HEVC stateless controls out of staging
From: Benjamin Gaignard
Date: Thu Mar 03 2022 - 05:13:13 EST
Le 03/03/2022 à 02:23, Adam Ford a écrit :
On Mon, Feb 28, 2022 at 4:13 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
Le 26/02/2022 à 23:25, Adam Ford a écrit :
On Fri, Feb 25, 2022 at 4:41 PM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
This series aims to make HEVC uapi stable and usable for hardware
decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
and 2 out of the tree drivers (rkvdec and RPI).
After the remarks done on version 2, I have completely reworked to patches
split so changelogs are meaningless. I have also drop "RFC" from the
titles.
In this v3 I do all the changes (new controls, documentation, etc..)
in the staging directory before moving the HEVC uAPI to stable
steps by steps (unlike the big one patch in v2).
At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
I have push a branch here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/HEVC_UAPI_V4
it is the incoming version 4 of this series + patches to enable G2 on my IMX8MQ
Benjamin,
I checked this repo out, and built it along with pulling the latest
versions of G-streamer and fluster.
When I check for v4l2 compatibility, I get the following:
GStreamer-H.264-V4L2-Gst1.0: GStreamer H.264 V4L2 decoder for
GStreamer 1.0... ❌
GStreamer-H.264-V4L2SL-Gst1.0: GStreamer H.264 V4L2SL decoder for
GStreamer 1.0... ✔️
GStreamer-AV1-V4L2SL-Gst1.0: GStreamer AV1 V4L2SL decoder for
GStreamer 1.0... ❌
GStreamer-H.265-V4L2-Gst1.0: GStreamer H.265 V4L2 decoder for
GStreamer 1.0... ❌
GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for
GStreamer 1.0... ❌
GStreamer-VP8-V4L2-Gst1.0: GStreamer VP8 V4L2 decoder for GStreamer 1.0... ❌
GStreamer-VP8-V4L2SL-Gst1.0: GStreamer VP8 V4L2SL decoder for
GStreamer 1.0... ✔️
GStreamer-VP9-V4L2SL-Gst1.0: GStreamer VP9 V4L2SL decoder for
GStreamer 1.0... ✔️
I see H,264, VP8 and VP9, but I would have also expected
GStreamer-H.265-V4L2SL-Gst1.0 to return with a check box.
When I checked to see if both decoders were being enumerated, I found they were.
[gst-main] root@localhost:~/gstreamer/fluster# dmesg |grep -i hantro
[ 16.044243] hantro_vpu: module is from the staging directory, the
quality is unknown, you have been warned.
[ 16.044243] hantro_vpu: module is from the staging directory, the
quality is unknown, you have been warned.
[ 16.095661] hantro-vpu 38300000.video-codec: registered
nxp,imx8mq-vpu-g1-dec as /dev/video0
[ 16.096782] hantro-vpu 38310000.video-codec: registered
nxp,imx8mq-vpu-g2-dec as /dev/video1
Did I do something wrong, or did I miss something?
Hi Adam,
I guess it could be a misalignment between v4l2 kernel headers
and GStreamer v4l2 headers.
I have push a new version of the GST merge request which is aligned with
HEVC uAPI v4 proposal.
When you inspect v4l2codecs gst plugin (gst-inspect-1.0 v4l2codecs) do
you see v4l2slh265dec plugin ?
I have fluster happy with it:
./fluster.py list -c
H265
...
GStreamer-H.265-V4L2-Gst1.0: GStreamer H.265 V4L2 decoder for GStreamer 1.0... ❌
GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for GStreamer 1.0... ✔️
GStreamer-H.265-VA-Gst1.0: GStreamer H.265 VA decoder for GStreamer 1.0... ❌
GStreamer-H.265-VAAPI-Gst1.0: GStreamer H.265 VAAPI decoder for GStreamer 1.0... ❌
JCT-VT-H.265: JCT-VT H.265/HEVC reference decoder... ❌
I hope that will help you,
Regards,
Benjamin
adam
Regards,
Benjamin
Benjamin,
I have an imx8mm and imx8mq that I can test. Do you happen to have a
repo that I can clone to test this? The imx8m stuff is spread around
between the media tree and the imx tree since it hasn't been fully
merged yet.
thanks,
adam
Benjamin
Benjamin Gaignard (11):
media: uapi: HEVC: Add missing fields in HEVC controls
media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
prefix
media: uapi: HEVC: Add document uAPI structure
media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
dynamic array
media: uapi: Move parsed HEVC pixel format out of staging
media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSET control
media: uapi: Move the HEVC stateless control type out of staging
media: controls: Log HEVC stateless control in .std_log
media: uapi: Create a dedicated header for Hantro control
media: uapi: HEVC: fix padding in v4l2 control structures
media: uapi: move HEVC stateless controls out of staging
Hans Verkuil (3):
videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
v4l2-ctrls: add support for dynamically allocated arrays.
vivid: add dynamic array test control
.../userspace-api/media/drivers/hantro.rst | 5 -
.../media/v4l/ext-ctrls-codec-stateless.rst | 831 ++++++++++++++++++
.../media/v4l/ext-ctrls-codec.rst | 780 ----------------
.../media/v4l/pixfmt-compressed.rst | 7 +-
.../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
.../media/v4l/vidioc-queryctrl.rst | 8 +
.../media/videodev2.h.rst.exceptions | 5 +
.../media/test-drivers/vivid/vivid-ctrls.c | 15 +
drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 ++-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 198 ++++-
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 32 +-
drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
drivers/staging/media/hantro/hantro_drv.c | 27 +-
drivers/staging/media/hantro/hantro_hevc.c | 8 +-
drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +-
.../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
include/media/hevc-ctrls.h | 250 ------
include/media/v4l2-ctrls.h | 48 +-
include/uapi/linux/hantro-media.h | 19 +
include/uapi/linux/v4l2-controls.h | 436 +++++++++
include/uapi/linux/videodev2.h | 13 +
22 files changed, 1686 insertions(+), 1169 deletions(-)
delete mode 100644 include/media/hevc-ctrls.h
create mode 100644 include/uapi/linux/hantro-media.h
--
2.32.0