[PATCH v3 32/39] Kbuild: Allow whole module objtool runs

[Peter Zijlstra]

Just like we have vmlinux.o objtool runs, add the ability to do whole
module objtool runs.

Suggested-by: Nathan Chancellor <nathan@xxxxxxxxxx>
Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
---
 scripts/Makefile.build    |   44 ++------------------------------------------
 scripts/Makefile.lib      |   45 +++++++++++++++++++++++++++++++++++++++++++++
 scripts/Makefile.modfinal |    1 +
 3 files changed, 48 insertions(+), 42 deletions(-)

--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -223,41 +223,6 @@ cmd_record_mcount = $(if $(findstring $(
 	$(sub_cmd_record_mcount))
 endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
 
-ifdef CONFIG_STACK_VALIDATION
-
-objtool := $(objtree)/tools/objtool/objtool
-
-objtool_args =								\
-	$(if $(CONFIG_UNWINDER_ORC),orc generate,check)			\
-	$(if $(part-of-module), --module)				\
-	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
-	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
-	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
-	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
-	$(if $(CONFIG_SLS), --sls)
-
-cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@)
-cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd)
-
-endif # CONFIG_STACK_VALIDATION
-
-ifdef CONFIG_LTO_CLANG
-
-# Skip objtool for LLVM bitcode
-$(obj)/%.o: objtool-enabled :=
-
-else
-
-# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
-# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
-# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
-
-$(obj)/%.o: objtool-enabled = $(if $(filter-out y%, \
-	$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y)
-
-endif
-
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 cmd_gen_ksymdeps = \
 	$(CONFIG_SHELL) $(srctree)/scripts/gen_ksymdeps.sh $@ >> $(dot-target).cmd
@@ -292,21 +257,16 @@ ifdef CONFIG_LTO_CLANG
 # Module .o files may contain LLVM bitcode, compile them into native code
 # before ELF processing
 quiet_cmd_cc_lto_link_modules = LTO [M] $@
-cmd_cc_lto_link_modules =						\
+      cmd_cc_lto_link_modules =						\
 	$(LD) $(ld_flags) -r -o $@					\
 		$(shell [ -s $(@:.lto.o=.o.symversions) ] &&		\
 			echo -T $(@:.lto.o=.o.symversions))		\
 		--whole-archive $(filter-out FORCE,$^)			\
 		$(cmd_objtool)
-
-# objtool was skipped for LLVM bitcode, run it now that we have compiled
-# modules into native code
-$(obj)/%.lto.o: objtool-enabled = y
-$(obj)/%.lto.o: part-of-module := y
+endif
 
 $(obj)/%.lto.o: $(obj)/%.o FORCE
 	$(call if_changed,cc_lto_link_modules)
-endif
 
 cmd_mod = { \
 	echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -533,3 +533,48 @@ define filechk_offsets
 	 echo ""; \
 	 echo "#endif"
 endef
+
+# objtool
+# ---------------------------------------------------------------------------
+
+ifdef CONFIG_STACK_VALIDATION
+
+objtool := $(objtree)/tools/objtool/objtool
+
+objtool_args =								\
+	$(if $(CONFIG_UNWINDER_ORC),orc generate,check)			\
+	$(if $(part-of-module), --module)				\
+	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
+	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
+	$(if $(CONFIG_RETPOLINE), --retpoline)				\
+	$(if $(CONFIG_X86_SMAP), --uaccess)				\
+	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
+	$(if $(CONFIG_SLS), --sls)
+
+cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@)
+cmd_objtool_mod = $(if $(objtool-enabled), $(objtool) $(objtool_args) $(@:.ko=.o) ; )
+cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd)
+
+endif # CONFIG_STACK_VALIDATION
+
+ifdef CONFIG_LTO_CLANG
+
+# Skip objtool for LLVM bitcode
+$(obj)/%.o: objtool-enabled :=
+
+# objtool was skipped for LLVM bitcode, run it now that we have compiled
+# modules into native code
+$(obj)/%.lto.o: objtool-enabled = y
+$(obj)/%.lto.o: part-of-module := y
+
+else
+
+# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
+# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
+# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
+
+$(obj)/%.o: objtool-enabled = $(if $(filter-out y%, \
+	$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y)
+
+endif
+
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -32,6 +32,7 @@ ARCH_POSTLINK := $(wildcard $(srctree)/a
 
 quiet_cmd_ld_ko_o = LD [M]  $@
       cmd_ld_ko_o +=							\
+	$(cmd_objtool_mod)						\
 	$(LD) -r $(KBUILD_LDFLAGS)					\
 		$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE)		\
 		-T scripts/module.lds -o $@ $(filter %.o, $^);		\