[PATCH 13/16] pata_parport: add kbic protocol driver

[Ondrej Zary]

Add KingByte KBIC-951A/971A protocol driver.

Signed-off-by: Ondrej Zary <linux@xxxxxxx>
---
 drivers/ata/pata_parport/Kconfig  |  12 ++
 drivers/ata/pata_parport/Makefile |   1 +
 drivers/ata/pata_parport/kbic.c   | 292 ++++++++++++++++++++++++++++++
 3 files changed, 305 insertions(+)
 create mode 100644 drivers/ata/pata_parport/kbic.c

diff --git a/drivers/ata/pata_parport/Kconfig b/drivers/ata/pata_parport/Kconfig
index d8e5feaaae7a..004e5cf708f1 100644
--- a/drivers/ata/pata_parport/Kconfig
+++ b/drivers/ata/pata_parport/Kconfig
@@ -142,3 +142,15 @@ config PATA_PARPORT_FRPW
 	  may answer Y here to build in the protocol driver, otherwise you
 	  should answer M to build it as a loadable module. The module will be
 	  called frpw.
+
+config PATA_PARPORT_KBIC
+	tristate "KingByte KBIC-951A/971A protocols"
+	depends on PATA_PARPORT
+	help
+	  This option enables support for the KBIC-951A and KBIC-971A parallel
+	  port IDE protocols from KingByte Information Corp. KingByte's
+	  adapters appear in many no-name portable disk and CD-ROM products,
+	  especially in Europe. If you chose to build PATA_PARPORT support into your
+	  kernel, you may answer Y here to build in the protocol driver,
+	  otherwise you should answer M to build it as a loadable module. The
+	  module will be called kbic.
diff --git a/drivers/ata/pata_parport/Makefile b/drivers/ata/pata_parport/Makefile
index 136374be9613..e82fded22da3 100644
--- a/drivers/ata/pata_parport/Makefile
+++ b/drivers/ata/pata_parport/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_PATA_PARPORT_EPAT)		+= epat.o
 obj-$(CONFIG_PATA_PARPORT_EPIA)		+= epia.o
 obj-$(CONFIG_PATA_PARPORT_FRIQ)		+= friq.o
 obj-$(CONFIG_PATA_PARPORT_FRPW)		+= frpw.o
+obj-$(CONFIG_PATA_PARPORT_KBIC)		+= kbic.o
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
new file mode 100644
index 000000000000..49f8a88db2a2
--- /dev/null
+++ b/drivers/ata/pata_parport/kbic.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *	kbic.c    (c) 1997-8  Grant R. Guenther <grant@xxxxxxxxxx>
+ *			      Under the terms of the GNU General Public License.
+ *
+ *	This is a low-level driver for the KBIC-951A and KBIC-971A
+ *	parallel to IDE adapter chips from KingByte Information Systems.
+ *
+ *	The chips are almost identical, however, the wakeup code
+ *	required for the 971A interferes with the correct operation of
+ *	the 951A, so this driver registers itself twice, once for
+ *	each chip.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/io.h>
+
+#include "pata_parport.h"
+
+#define r12w()		(delay_p, inw(pi->port + 1) & 0xffff)
+
+#define j44(a, b)	((((a >> 4) & 0x0f) | (b & 0xf0)) ^ 0x88)
+#define j53(w)		(((w >> 3) & 0x1f) | ((w >> 4) & 0xe0))
+
+
+/* cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+
+static int cont_map[2] = { 0x80, 0x40 };
+
+static int kbic_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, s;
+
+	s = cont_map[cont];
+
+	switch (pi->mode) {
+	case 0:
+		w0(regr | 0x18 | s); w2(4); w2(6); w2(4); w2(1); w0(8);
+		a = r1(); w0(0x28); b = r1(); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(regr | 0x38 | s); w2(4); w2(6); w2(4); w2(5); w0(8);
+		a = r12w(); w2(4);
+		return j53(a);
+	case 2:
+		w0(regr | 0x08 | s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
+		a = r0(); w2(4);
+		return a;
+	case 3:
+	case 4:
+	case 5:
+		w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
+		a = r4(); b = r4(); w2(4); w2(0); w2(4);
+		return a;
+	}
+	return -1;
+}
+
+static void kbic_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int s = cont_map[cont];
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(regr | 0x10 | s); w2(4); w2(6); w2(4);
+		w0(val); w2(5); w2(4);
+		break;
+	case 3:
+	case 4:
+	case 5:
+		w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
+		w4(val); w4(val);
+		w2(4); w2(0); w2(4);
+		break;
+	}
+}
+
+static void k951_connect(struct pi_adapter *pi)
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4);
+}
+
+static void k951_disconnect(struct pi_adapter *pi)
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
+
+#define	CCP(x)	do { w2(0xc4); w0(0xaa); w0(0x55); w0(0); w0(0xff); w0(0x87);\
+		     w0(0x78); w0(x); w2(0xc5); w2(0xc4); w0(0xff);\
+		} while (0)
+
+static void k971_connect(struct pi_adapter *pi)
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	CCP(0x20);
+	w2(4);
+}
+
+static void k971_disconnect(struct pi_adapter *pi)
+{
+	CCP(0x30);
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
+
+/* counts must be congruent to 0 MOD 4, but all known applications
+ * have this property.
+ */
+
+static void kbic_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
+
+	switch (pi->mode) {
+	case 0:
+		w0(0x98); w2(4); w2(6); w2(4);
+		for (k = 0; k < count/2; k++) {
+			w2(1); w0(8);    a = r1();
+			       w0(0x28); b = r1();
+			buf[2 * k]   = j44(a, b);
+			w2(5);	   b = r1();
+			       w0(8);    a = r1();
+			buf[2 * k + 1] = j44(a, b);
+			w2(4);
+		}
+		break;
+	case 1:
+		w0(0xb8); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 4; k++) {
+			w0(0xb8);
+			w2(4); w2(5);
+			w0(8);    buf[4 * k]   = j53(r12w());
+			w0(0xb8); buf[4 * k + 1] = j53(r12w());
+			w2(4); w2(5);
+				  buf[4 * k + 3] = j53(r12w());
+			w0(8);    buf[4 * k + 2] = j53(r12w());
+		}
+		w2(4);
+		break;
+	case 2:
+		w0(0x88); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(0xa0); w2(0xa1); buf[2 * k] = r0();
+			w2(0xa5); buf[2 * k + 1] = r0();
+		}
+		w2(4);
+		break;
+	case 3:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4); w2(0); w2(4);
+		break;
+	case 4:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4); w2(0); w2(4);
+		break;
+	case 5:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4); w2(0); w2(4);
+		break;
+	}
+}
+
+static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(0x90); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w0(buf[2 * k + 1]); w2(0); w2(4);
+			w0(buf[2 * k]);   w2(5); w2(4);
+		}
+		break;
+	case 3:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++) {
+			w4(buf[2 * k + 1]);
+			w4(buf[2 * k]);
+		}
+		w2(4); w2(0); w2(4);
+		break;
+	case 4:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++)
+			w4w(pi_swab16(buf, k));
+		w2(4); w2(0); w2(4);
+		break;
+	case 5:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 4; k++)
+			w4l(pi_swab32(buf, k));
+		w2(4); w2(0); w2(4);
+		break;
+	}
+}
+
+static void kbic_log_adapter(struct pi_adapter *pi, char *scratch, int verbose, char *chip)
+{
+	static char * const mode_string[] = {
+		"4-bit", "5/3", "8-bit", "EPP-8", "EPP_16", "EPP-32"};
+
+	dev_info(&pi->dev, "kbic, KingByte %s at 0x%x, mode %d (%s), delay %d\n",
+		chip, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+}
+
+static void k951_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+{
+	kbic_log_adapter(pi, scratch, verbose, "KBIC-951A");
+}
+
+static void k971_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+{
+	kbic_log_adapter(pi, scratch, verbose, "KBIC-971A");
+}
+
+static struct pi_protocol k951 = {
+	.owner		= THIS_MODULE,
+	.name		= "k951",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= kbic_write_regr,
+	.read_regr	= kbic_read_regr,
+	.write_block	= kbic_write_block,
+	.read_block	= kbic_read_block,
+	.connect	= k951_connect,
+	.disconnect	= k951_disconnect,
+	.log_adapter	= k951_log_adapter,
+};
+
+static struct pi_protocol k971 = {
+	.owner		= THIS_MODULE,
+	.name		= "k971",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= kbic_write_regr,
+	.read_regr	= kbic_read_regr,
+	.write_block	= kbic_write_block,
+	.read_block	= kbic_read_block,
+	.connect	= k971_connect,
+	.disconnect	= k971_disconnect,
+	.log_adapter	= k971_log_adapter,
+	.sht		= { PATA_PARPORT_SHT("pata_parport-kbic") },
+};
+
+static int __init kbic_init(void)
+{
+	int rv;
+
+	rv = pata_parport_register_driver(&k951);
+	if (rv < 0)
+		return rv;
+	rv = pata_parport_register_driver(&k971);
+	if (rv < 0)
+		pata_parport_unregister_driver(&k951);
+	return rv;
+}
+
+static void __exit kbic_exit(void)
+{
+	pata_parport_unregister_driver(&k951);
+	pata_parport_unregister_driver(&k971);
+}
+
+MODULE_LICENSE("GPL");
+module_init(kbic_init)
+module_exit(kbic_exit)
-- 
Ondrej Zary