[PATCH v3 07/12] dt-bindings: ufs: mediatek,ufs: convert to dtschema

From: Krzysztof Kozlowski
Date: Sun Mar 06 2022 - 06:13:28 EST


Convert the Mediatek Universal Flash Storage (UFS) Controller to DT
schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/ufs/mediatek,ufs.yaml | 67 +++++++++++++++++++
.../devicetree/bindings/ufs/ufs-mediatek.txt | 45 -------------
2 files changed, 67 insertions(+), 45 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
delete mode 100644 Documentation/devicetree/bindings/ufs/ufs-mediatek.txt

diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
new file mode 100644
index 000000000000..32fd535a514a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Universal Flash Storage (UFS) Controller
+
+maintainers:
+ - Stanley Chu <stanley.chu@xxxxxxxxxxxx>
+
+allOf:
+ - $ref: ufs-common.yaml
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8183-ufshci
+ - mediatek,mt8192-ufshci
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ufs
+
+ phys:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ vcc-supply: true
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - phys
+ - reg
+ - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs@ff3c0000 {
+ compatible = "mediatek,mt8183-ufshci";
+ reg = <0 0x11270000 0 0x2300>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&ufsphy>;
+
+ clocks = <&infracfg_ao CLK_INFRA_UFS>;
+ clock-names = "ufs";
+ freq-table-hz = <0 0>;
+
+ vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
deleted file mode 100644
index 63a953b672d2..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Mediatek Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-To bind UFS PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS M-PHY node.
-
-Required properties for UFS nodes:
-- compatible : Compatible list, contains the following controller:
- "mediatek,mt8183-ufshci" for MediaTek UFS host controller
- present on MT8183 chipsets.
- "mediatek,mt8192-ufshci" for MediaTek UFS host controller
- present on MT8192 chipsets.
-- reg : Address and length of the UFS register set.
-- phys : phandle to m-phy.
-- clocks : List of phandle and clock specifier pairs.
-- clock-names : List of clock input name strings sorted in the same
- order as the clocks property. "ufs" is mandatory.
- "ufs": ufshci core control clock.
-- freq-table-hz : Array of <min max> operating frequencies stored in the same
- order as the clocks property. If this property is not
- defined or a value in the array is "0" then it is assumed
- that the frequency is set by the parent clock or a
- fixed rate clock source.
-- vcc-supply : phandle to VCC supply regulator node.
-
-Example:
-
- ufsphy: phy@11fa0000 {
- ...
- };
-
- ufshci@11270000 {
- compatible = "mediatek,mt8183-ufshci";
- reg = <0 0x11270000 0 0x2300>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
- phys = <&ufsphy>;
-
- clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
- clock-names = "ufs";
- freq-table-hz = <0 0>;
-
- vcc-supply = <&mt_pmic_vemc_ldo_reg>;
- };
--
2.32.0