Re: [PATCH v6 04/13] media: atmel: atmel-isc: implement media controller

[Eugen.Hristev]

On 3/7/22 10:46 AM, Jacopo Mondi wrote:
> Hi Eugen
> 
> On Thu, Mar 03, 2022 at 05:36:09PM +0200, Eugen Hristev wrote:
>> Implement the support for media-controller.
>> This means that the capabilities of the driver have changed and now
>> it also advertises the IO_MC .
>> The driver will register its media device, and add the video entity to this
>> media device. The subdevices are registered to the same media device.
>> The ISC will have a base entity which is auto-detected as atmel_isc_base.
>> It will also register a subdevice that allows cropping of the incoming frame
>> to the maximum frame size supported by the ISC.
>> The ISC will create a link between the subdevice that is asynchronously
>> registered and the atmel_isc_scaler entity.
>> Then, the atmel_isc_scaler and atmel_isc_base are connected through another
>> link.
>>
>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>> ---
>> Changes in v6:
>> - reworked a bit as suggested by Jacopo
>> - add try crops
>>
>> Changes in v5:
>> - reworked s_fmt to pass the same format from sink to source
>> - simplified enum_mbus_code
>> - separated tgt and bounds to report correctly in g_sel
>>
>> Changes in v4:
>> As suggested by Jacopo:
>> - renamed atmel_isc_mc to atmel_isc_scaler.c
>> - moved init_mc/clean_mc to isc_base file
>>
>> Changes in v2:
>> - implement try formats
>>
>>   drivers/media/platform/atmel/Makefile         |   2 +-
>>   drivers/media/platform/atmel/atmel-isc-base.c |  75 ++++-
>>   .../media/platform/atmel/atmel-isc-scaler.c   | 271 ++++++++++++++++++
>>   drivers/media/platform/atmel/atmel-isc.h      |  37 +++
>>   .../media/platform/atmel/atmel-sama5d2-isc.c  |  14 +-
>>   .../media/platform/atmel/atmel-sama7g5-isc.c  |  12 +-
>>   6 files changed, 403 insertions(+), 8 deletions(-)
>>   create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c
>>
>> diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
>> index 794e8f739287..f02d03df89d6 100644
>> --- a/drivers/media/platform/atmel/Makefile
>> +++ b/drivers/media/platform/atmel/Makefile
>> @@ -1,7 +1,7 @@
>>   # SPDX-License-Identifier: GPL-2.0-only
>>   atmel-isc-objs = atmel-sama5d2-isc.o
>>   atmel-xisc-objs = atmel-sama7g5-isc.o
>> -atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o
>> +atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o atmel-isc-scaler.o
>>
>>   obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
>>   obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-common.o
>> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
>> index 67b4a2323fed..448bf281c61a 100644
>> --- a/drivers/media/platform/atmel/atmel-isc-base.c
>> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
>> @@ -1712,6 +1712,7 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
>>                                              struct isc_device, v4l2_dev);
>>        struct isc_subdev_entity *subdev_entity =
>>                container_of(notifier, struct isc_subdev_entity, notifier);
>> +     int pad;
>>
>>        if (video_is_registered(&isc->video_dev)) {
>>                v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n");
>> @@ -1720,6 +1721,16 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
>>
>>        subdev_entity->sd = subdev;
>>
>> +     pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
>> +                                       MEDIA_PAD_FL_SOURCE);
>> +     if (pad < 0) {
>> +             v4l2_err(&isc->v4l2_dev, "failed to find pad for %s\n",
>> +                      subdev->name);
>> +             return pad;
>> +     }
>> +
>> +     isc->remote_pad = pad;
>> +
>>        return 0;
>>   }
>>
>> @@ -1734,8 +1745,8 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
>>        v4l2_ctrl_handler_free(&isc->ctrls.handler);
>>   }
>>
>> -static struct isc_format *find_format_by_code(struct isc_device *isc,
>> -                                           unsigned int code, int *index)
>> +struct isc_format *isc_find_format_by_code(struct isc_device *isc,
>> +                                        unsigned int code, int *index)
>>   {
>>        struct isc_format *fmt = &isc->formats_list[0];
>>        unsigned int i;
>> @@ -1751,6 +1762,7 @@ static struct isc_format *find_format_by_code(struct isc_device *isc,
>>
>>        return NULL;
>>   }
>> +EXPORT_SYMBOL_GPL(isc_find_format_by_code);
>>
>>   static int isc_formats_init(struct isc_device *isc)
>>   {
>> @@ -1767,7 +1779,7 @@ static int isc_formats_init(struct isc_device *isc)
>>               NULL, &mbus_code)) {
>>                mbus_code.index++;
>>
>> -             fmt = find_format_by_code(isc, mbus_code.code, &i);
>> +             fmt = isc_find_format_by_code(isc, mbus_code.code, &i);
>>                if (!fmt) {
>>                        v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
>>                                  mbus_code.code);
>> @@ -1893,7 +1905,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>        vdev->queue             = q;
>>        vdev->lock              = &isc->lock;
>>        vdev->ctrl_handler      = &isc->ctrls.handler;
>> -     vdev->device_caps       = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
>> +     vdev->device_caps       = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
>> +                               V4L2_CAP_IO_MC;
>>        video_set_drvdata(vdev, isc);
>>
>>        ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
>> @@ -1903,8 +1916,19 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>                goto isc_async_complete_err;
>>        }
>>
>> +     ret = isc_scaler_link(isc);
>> +     if (ret < 0)
>> +             goto isc_async_complete_unregister_device;
>> +
>> +     ret = media_device_register(&isc->mdev);
>> +     if (ret < 0)
>> +             goto isc_async_complete_unregister_device;
>> +
>>        return 0;
>>
>> +isc_async_complete_unregister_device:
>> +     video_unregister_device(vdev);
>> +
>>   isc_async_complete_err:
>>        mutex_destroy(&isc->lock);
>>        return ret;
>> @@ -1971,6 +1995,49 @@ int isc_pipeline_init(struct isc_device *isc)
>>   }
>>   EXPORT_SYMBOL_GPL(isc_pipeline_init);
>>
>> +int isc_mc_init(struct isc_device *isc, u32 ver)
>> +{
>> +     const struct of_device_id *match;
>> +     int ret;
>> +
>> +     isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
>> +     isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
>> +     isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>> +
>> +     ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
>> +                                  isc->pads);
>> +     if (ret < 0) {
>> +             dev_err(isc->dev, "media entity init failed\n");
>> +             return ret;
>> +     }
>> +
>> +     isc->mdev.dev = isc->dev;
>> +
>> +     match = of_match_node(isc->dev->driver->of_match_table,
>> +                           isc->dev->of_node);
>> +
>> +     strscpy(isc->mdev.driver_name, KBUILD_MODNAME,
>> +             sizeof(isc->mdev.driver_name));
>> +     strscpy(isc->mdev.model, match->compatible, sizeof(isc->mdev.model));
>> +     snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
>> +              isc->v4l2_dev.name);
>> +     isc->mdev.hw_revision = ver;
>> +
>> +     media_device_init(&isc->mdev);
>> +
>> +     isc->v4l2_dev.mdev = &isc->mdev;
>> +
>> +     return isc_scaler_init(isc);
>> +}
>> +EXPORT_SYMBOL_GPL(isc_mc_init);
>> +
>> +void isc_mc_cleanup(struct isc_device *isc)
>> +{
>> +     media_entity_cleanup(&isc->video_dev.entity);
>> +     media_device_cleanup(&isc->mdev);
>> +}
>> +EXPORT_SYMBOL_GPL(isc_mc_cleanup);
>> +
>>   /* regmap configuration */
>>   #define ATMEL_ISC_REG_MAX    0xd5c
>>   const struct regmap_config isc_regmap_config = {
>> diff --git a/drivers/media/platform/atmel/atmel-isc-scaler.c b/drivers/media/platform/atmel/atmel-isc-scaler.c
>> new file mode 100644
>> index 000000000000..305524c1123e
>> --- /dev/null
>> +++ b/drivers/media/platform/atmel/atmel-isc-scaler.c
>> @@ -0,0 +1,271 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Microchip Image Sensor Controller (ISC) Scaler entity support
>> + *
>> + * Copyright (C) 2022 Microchip Technology, Inc.
>> + *
>> + * Author: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>> + *
>> + */
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-subdev.h>
>> +
>> +#include "atmel-isc-regs.h"
>> +#include "atmel-isc.h"
>> +
>> +static void isc_scaler_prepare_fmt(struct v4l2_mbus_framefmt *framefmt)
>> +{
>> +     framefmt->colorspace = V4L2_COLORSPACE_SRGB;
>> +     framefmt->field = V4L2_FIELD_NONE;
>> +     framefmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
>> +     framefmt->quantization = V4L2_QUANTIZATION_DEFAULT;
>> +     framefmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
>> +};
>> +
>> +static int isc_scaler_get_fmt(struct v4l2_subdev *sd,
>> +                           struct v4l2_subdev_state *sd_state,
>> +                           struct v4l2_subdev_format *format)
>> +{
>> +     struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
>> +     struct v4l2_mbus_framefmt *v4l2_try_fmt;
>> +
>> +     if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
>> +             v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
>> +                                                       format->pad);
>> +             format->format = *v4l2_try_fmt;
>> +
>> +             return 0;
>> +     }
>> +
>> +     format->format = isc->scaler_format[format->pad];
>> +
>> +     return 0;
>> +}
>> +
>> +static int isc_scaler_set_fmt(struct v4l2_subdev *sd,
>> +                           struct v4l2_subdev_state *sd_state,
>> +                           struct v4l2_subdev_format *req_fmt)
>> +{
>> +     struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
>> +     struct v4l2_mbus_framefmt *v4l2_try_fmt;
>> +     struct isc_format *fmt;
>> +     unsigned int i;
>> +
>> +     /* Source format is fixed, we cannot change it */
>> +     if (req_fmt->pad == ISC_SCALER_PAD_SOURCE) {
>> +             req_fmt->format = isc->scaler_format[ISC_SCALER_PAD_SOURCE];
>> +             return 0;
>> +     }
>> +
>> +     /* There is no limit on the frame size on the sink pad */
>> +     v4l_bound_align_image(&req_fmt->format.width, 16, UINT_MAX, 0,
>> +                           &req_fmt->format.height, 16, UINT_MAX, 0, 0);
>> +
>> +     isc_scaler_prepare_fmt(&req_fmt->format);
>> +
>> +     fmt = isc_find_format_by_code(isc, req_fmt->format.code, &i);
>> +
>> +     if (!fmt)
>> +             fmt = &isc->formats_list[0];
>> +
>> +     req_fmt->format.code = fmt->mbus_code;
>> +
>> +     if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>> +             v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
>> +                                                       req_fmt->pad);
>> +             *v4l2_try_fmt = req_fmt->format;
>> +             /* Trying on the sink pad makes the source pad change too */
>> +             v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
>> +                                                       ISC_SCALER_PAD_SOURCE);
>> +             *v4l2_try_fmt = req_fmt->format;
>> +
>> +             v4l_bound_align_image(&v4l2_try_fmt->width,
>> +                                   16, isc->max_width, 0,
>> +                                   &v4l2_try_fmt->height,
>> +                                   16, isc->max_height, 0, 0);
>> +             /* if we are just trying, we are done */
>> +             return 0;
>> +     }
>> +
>> +     isc->scaler_format[ISC_SCALER_PAD_SINK] = req_fmt->format;
>> +
>> +     /* The source pad is the same as the sink, but we have to crop it */
>> +     isc->scaler_format[ISC_SCALER_PAD_SOURCE] =
>> +             isc->scaler_format[ISC_SCALER_PAD_SINK];
>> +     v4l_bound_align_image
>> +             (&isc->scaler_format[ISC_SCALER_PAD_SOURCE].width, 16,
>> +              isc->max_width, 0,
>> +              &isc->scaler_format[ISC_SCALER_PAD_SOURCE].height, 16,
>> +              isc->max_height, 0, 0);
>> +
>> +     return 0;
>> +}
>> +
>> +static int isc_scaler_enum_mbus_code(struct v4l2_subdev *sd,
>> +                                  struct v4l2_subdev_state *sd_state,
>> +                                  struct v4l2_subdev_mbus_code_enum *code)
>> +{
>> +     struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
>> +
>> +     /*
>> +      * All formats supported by the ISC are supported by the scaler.
>> +      * Advertise the formats which the ISC can take as input, as the scaler
>> +      * entity cropping is part of the PFE module (parallel front end)
>> +      */
>> +     if (code->index < isc->formats_list_size) {
>> +             code->code = isc->formats_list[code->index].mbus_code;
>> +             return 0;
>> +     }
>> +
>> +     return -EINVAL;
>> +}
>> +
>> +static int isc_scaler_g_sel(struct v4l2_subdev *sd,
>> +                         struct v4l2_subdev_state *sd_state,
>> +                         struct v4l2_subdev_selection *sel)
>> +{
>> +     struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
>> +
>> +     if (sel->pad == ISC_SCALER_PAD_SOURCE)
>> +             return -EINVAL;
>> +
>> +     if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) {
>> +             /* bounds are the input format received */
>> +             sel->r.height = isc->scaler_format[ISC_SCALER_PAD_SINK].height;
>> +             sel->r.width = isc->scaler_format[ISC_SCALER_PAD_SINK].width;
> 
> I'll re-paste our discussion on v4 to make sure we're on the same page
> 
> -------------------------------------------------------------------------------
>>>> +     if (sel->pad == ISC_SCALER_PAD_SOURCE)
>>>> +             return -EINVAL;
>>>> +
>>>> +     if (sel->target != V4L2_SEL_TGT_CROP_BOUNDS &&
>>>> +         sel->target != V4L2_SEL_TGT_CROP)
>>>> +             return -EINVAL;
>>>> +
>>>> +     sel->r.height = isc->max_height;
>>>> +     sel->r.width = isc->max_width;
>>>
>>> The CROP_BOUNDS should be set to the same size as the sink pad image format,
>>> as it represents the maximum valid crop rectangle.
>>>
>>> TGT_CROP should report the configured crop rectangle which can be
>>> intiialized to the same size as CROP_BOUNDS, if my understanding of
>>> the spec is correct
>>
>> So you would like to have this differentiated, and report the
>> CROP_BOUNDS to whatever is on the sink pad, and the TGT_CROP to what is
>> reported now, the maximum size of the ISC frame .
>> My understanding is correct ?
>>
> 
> I didn't know you have an HW limitation, so your _BOUNDS is not the
> input image size but rather 3264x2464 ( == max_width x max_height).
> 
> What I meant is that _BOUNDS should report the maximum rectangle size
> that can be applied to the _CROP target. In you case you have an HW
> limitation 3264x2464 and that's the largest rectangle you can apply.
> TGT_CROP can be initialized to the same as _BOUND, but if you
> implement s_selection it should report what has been there applied.
> But as you don't implement s_selection yet, I think this is fine for
> now. Maybe a little comment ?
> -------------------------------------------------------------------------------
> 
> I think then that _BOUNDS should be fixed to 3264x2464 and CROP to
> src_fmt.
> 
> The rest looks good! Thanks for pushing up to this version and thanks
> for addressings comments!
> 
> Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
> 
> Thanks
>    j

Hello Jacopo,

So BOUNDS goes to isc max H / max V, and CROP goes to format of the 
source pad.
Got it.

I will update with a v7 as soon as you give me your feedback on the 
patch 8/13 which still required some changes from v6.

Thanks again for reviewing this !

Eugen

> 
>> +             sel->r.left = 0;
>> +             sel->r.top = 0;
>> +     } else if (sel->target == V4L2_SEL_TGT_CROP) {
>> +             /*
>> +              * crop is done to the output format,
>> +              * limited by ISC maximum size
>> +              */
>> +             sel->r.height = isc->scaler_format[ISC_SCALER_PAD_SOURCE].height;
>> +             sel->r.width = isc->scaler_format[ISC_SCALER_PAD_SOURCE].width;
>> +             sel->r.left = 0;
>> +             sel->r.top = 0;
>> +     } else {
>> +             return -EINVAL;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int isc_scaler_init_cfg(struct v4l2_subdev *sd,
>> +                            struct v4l2_subdev_state *sd_state)
>> +{
>> +     struct v4l2_mbus_framefmt *v4l2_try_fmt =
>> +             v4l2_subdev_get_try_format(sd, sd_state, 0);
>> +     struct v4l2_rect *try_crop;
>> +     struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
>> +
>> +     *v4l2_try_fmt = isc->scaler_format[ISC_SCALER_PAD_SOURCE];
>> +
>> +     try_crop = v4l2_subdev_get_try_crop(sd, sd_state, 0);
>> +
>> +     try_crop->top = 0;
>> +     try_crop->left = 0;
>> +     try_crop->width = v4l2_try_fmt->width;
>> +     try_crop->height = v4l2_try_fmt->height;
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
>> +     .enum_mbus_code = isc_scaler_enum_mbus_code,
>> +     .set_fmt = isc_scaler_set_fmt,
>> +     .get_fmt = isc_scaler_get_fmt,
>> +     .get_selection = isc_scaler_g_sel,
>> +     .init_cfg = isc_scaler_init_cfg,
>> +};
>> +
>> +static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
>> +     .pad = &isc_scaler_pad_ops,
>> +};
>> +
>> +int isc_scaler_init(struct isc_device *isc)
>> +{
>> +     int ret;
>> +
>> +     v4l2_subdev_init(&isc->scaler_sd, &xisc_scaler_subdev_ops);
>> +
>> +     isc->scaler_sd.owner = THIS_MODULE;
>> +     isc->scaler_sd.dev = isc->dev;
>> +     snprintf(isc->scaler_sd.name, sizeof(isc->scaler_sd.name),
>> +              "atmel_isc_scaler");
>> +
>> +     isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +     isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
>> +     isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>> +     isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
>> +
>> +     isc_scaler_prepare_fmt(&isc->scaler_format[ISC_SCALER_PAD_SOURCE]);
>> +     isc->scaler_format[ISC_SCALER_PAD_SOURCE].height = isc->max_height;
>> +     isc->scaler_format[ISC_SCALER_PAD_SOURCE].width = isc->max_width;
>> +     isc->scaler_format[ISC_SCALER_PAD_SOURCE].code =
>> +              isc->formats_list[0].mbus_code;
>> +
>> +     isc->scaler_format[ISC_SCALER_PAD_SINK] =
>> +              isc->scaler_format[ISC_SCALER_PAD_SOURCE];
>> +
>> +     ret = media_entity_pads_init(&isc->scaler_sd.entity,
>> +                                  ISC_SCALER_PADS_NUM,
>> +                                  isc->scaler_pads);
>> +     if (ret < 0) {
>> +             dev_err(isc->dev, "scaler sd media entity init failed\n");
>> +             return ret;
>> +     }
>> +
>> +     ret = v4l2_device_register_subdev(&isc->v4l2_dev, &isc->scaler_sd);
>> +     if (ret < 0) {
>> +             dev_err(isc->dev, "scaler sd failed to register subdev\n");
>> +             return ret;
>> +     }
>> +
>> +     return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(isc_scaler_init);
>> +
>> +int isc_scaler_link(struct isc_device *isc)
>> +{
>> +     int ret;
>> +
>> +     ret = media_create_pad_link(&isc->current_subdev->sd->entity,
>> +                                 isc->remote_pad, &isc->scaler_sd.entity,
>> +                                 ISC_SCALER_PAD_SINK,
>> +                                 MEDIA_LNK_FL_ENABLED |
>> +                                 MEDIA_LNK_FL_IMMUTABLE);
>> +
>> +     if (ret < 0) {
>> +             dev_err(isc->dev, "Failed to create pad link: %s to %s\n",
>> +                     isc->current_subdev->sd->entity.name,
>> +                     isc->scaler_sd.entity.name);
>> +             return ret;
>> +     }
>> +
>> +     dev_dbg(isc->dev, "link with %s pad: %d\n",
>> +             isc->current_subdev->sd->name, isc->remote_pad);
>> +
>> +     ret = media_create_pad_link(&isc->scaler_sd.entity,
>> +                                 ISC_SCALER_PAD_SOURCE,
>> +                                 &isc->video_dev.entity, ISC_PAD_SINK,
>> +                                 MEDIA_LNK_FL_ENABLED |
>> +                                 MEDIA_LNK_FL_IMMUTABLE);
>> +
>> +     if (ret < 0) {
>> +             dev_err(isc->dev, "Failed to create pad link: %s to %s\n",
>> +                     isc->scaler_sd.entity.name,
>> +                     isc->video_dev.entity.name);
>> +             return ret;
>> +     }
>> +
>> +     dev_dbg(isc->dev, "link with %s pad: %d\n", isc->scaler_sd.name,
>> +             ISC_SCALER_PAD_SOURCE);
>> +
>> +     return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(isc_scaler_link);
>> +
>> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
>> index f9ad7ec6bd13..9cc69c3ae26d 100644
>> --- a/drivers/media/platform/atmel/atmel-isc.h
>> +++ b/drivers/media/platform/atmel/atmel-isc.h
>> @@ -183,6 +183,17 @@ struct isc_reg_offsets {
>>        u32 his_entry;
>>   };
>>
>> +enum isc_mc_pads {
>> +     ISC_PAD_SINK    = 0,
>> +     ISC_PADS_NUM    = 1,
>> +};
>> +
>> +enum isc_scaler_pads {
>> +     ISC_SCALER_PAD_SINK     = 0,
>> +     ISC_SCALER_PAD_SOURCE   = 1,
>> +     ISC_SCALER_PADS_NUM     = 2,
>> +};
>> +
>>   /*
>>    * struct isc_device - ISC device driver data/config struct
>>    * @regmap:          Register map
>> @@ -258,6 +269,12 @@ struct isc_reg_offsets {
>>    *                   be used as an input to the controller
>>    * @controller_formats_size: size of controller_formats array
>>    * @formats_list_size:       size of formats_list array
>> + * @pads:            media controller pads for isc video entity
>> + * @mdev:            media device that is registered by the isc
>> + * @remote_pad:              remote pad on the connected subdevice
>> + * @scaler_sd:               subdevice for the scaler that isc registers
>> + * @scaler_pads:     media controller pads for the scaler subdevice
>> + * @scaler_format:   current format for the scaler subdevice
>>    */
>>   struct isc_device {
>>        struct regmap           *regmap;
>> @@ -346,6 +363,19 @@ struct isc_device {
>>        struct isc_format               *formats_list;
>>        u32                             controller_formats_size;
>>        u32                             formats_list_size;
>> +
>> +     struct {
>> +             struct media_pad                pads[ISC_PADS_NUM];
>> +             struct media_device             mdev;
>> +
>> +             u32                             remote_pad;
>> +     };
>> +
>> +     struct {
>> +             struct v4l2_subdev              scaler_sd;
>> +             struct media_pad                scaler_pads[ISC_SCALER_PADS_NUM];
>> +             struct v4l2_mbus_framefmt       scaler_format[ISC_SCALER_PADS_NUM];
>> +     };
>>   };
>>
>>   extern const struct regmap_config isc_regmap_config;
>> @@ -357,4 +387,11 @@ int isc_clk_init(struct isc_device *isc);
>>   void isc_subdev_cleanup(struct isc_device *isc);
>>   void isc_clk_cleanup(struct isc_device *isc);
>>
>> +int isc_scaler_link(struct isc_device *isc);
>> +int isc_scaler_init(struct isc_device *isc);
>> +int isc_mc_init(struct isc_device *isc, u32 ver);
>> +void isc_mc_cleanup(struct isc_device *isc);
>> +
>> +struct isc_format *isc_find_format_by_code(struct isc_device *isc,
>> +                                        unsigned int code, int *index);
>>   #endif
>> diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
>> index c5b9563e36cb..c244682ea22f 100644
>> --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
>> +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
>> @@ -553,6 +553,12 @@ static int atmel_isc_probe(struct platform_device *pdev)
>>                        break;
>>        }
>>
>> +     regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
>> +
>> +     ret = isc_mc_init(isc, ver);
>> +     if (ret < 0)
>> +             goto isc_probe_mc_init_err;
>> +
>>        pm_runtime_set_active(dev);
>>        pm_runtime_enable(dev);
>>        pm_request_idle(dev);
>> @@ -562,7 +568,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
>>        ret = clk_prepare_enable(isc->ispck);
>>        if (ret) {
>>                dev_err(dev, "failed to enable ispck: %d\n", ret);
>> -             goto cleanup_subdev;
>> +             goto isc_probe_mc_init_err;
>>        }
>>
>>        /* ispck should be greater or equal to hclock */
>> @@ -572,7 +578,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
>>                goto unprepare_clk;
>>        }
>>
>> -     regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
>>        dev_info(dev, "Microchip ISC version %x\n", ver);
>>
>>        return 0;
>> @@ -580,6 +585,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
>>   unprepare_clk:
>>        clk_disable_unprepare(isc->ispck);
>>
>> +isc_probe_mc_init_err:
>> +     isc_mc_cleanup(isc);
>> +
>>   cleanup_subdev:
>>        isc_subdev_cleanup(isc);
>>
>> @@ -600,6 +608,8 @@ static int atmel_isc_remove(struct platform_device *pdev)
>>
>>        pm_runtime_disable(&pdev->dev);
>>
>> +     isc_mc_cleanup(isc);
>> +
>>        isc_subdev_cleanup(isc);
>>
>>        v4l2_device_unregister(&isc->v4l2_dev);
>> diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
>> index 07a80b08bc54..9dc75eed0098 100644
>> --- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
>> +++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
>> @@ -547,15 +547,23 @@ static int microchip_xisc_probe(struct platform_device *pdev)
>>                        break;
>>        }
>>
>> +     regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
>> +
>> +     ret = isc_mc_init(isc, ver);
>> +     if (ret < 0)
>> +             goto isc_probe_mc_init_err;
>> +
>>        pm_runtime_set_active(dev);
>>        pm_runtime_enable(dev);
>>        pm_request_idle(dev);
>>
>> -     regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
>>        dev_info(dev, "Microchip XISC version %x\n", ver);
>>
>>        return 0;
>>
>> +isc_probe_mc_init_err:
>> +     isc_mc_cleanup(isc);
>> +
>>   cleanup_subdev:
>>        isc_subdev_cleanup(isc);
>>
>> @@ -576,6 +584,8 @@ static int microchip_xisc_remove(struct platform_device *pdev)
>>
>>        pm_runtime_disable(&pdev->dev);
>>
>> +     isc_mc_cleanup(isc);
>> +
>>        isc_subdev_cleanup(isc);
>>
>>        v4l2_device_unregister(&isc->v4l2_dev);
>> --
>> 2.25.1
>>