Re: [PATCH V3 2/7] dt-bindings: spi: Add compatible for MT7986 with single mode

[AngeloGioacchino Del Regno]

Il 07/03/22 07:52, Leilk Liu ha scritto:
> This patch adds dt-binding documentation for MT7986 with single mode.
>
> Signed-off-by: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>   Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
> index bfa44acb1bdd..48024b98408a 100644
> --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
> +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
> @@ -41,6 +41,7 @@ properties:
>                 - mediatek,mt8135-spi
>                 - mediatek,mt8173-spi
>                 - mediatek,mt8183-spi
> +              - mediatek,mt7986-spi-single
>   
>     reg:
>       maxItems: 1

I think that the best way to do this is to better organize the compatibles
per-hardware, here... or the compatibles list will eventually grow out of
control for little reason.

Since "IPM" is a new SPI controller IP, I would expect more and more MediaTek
SoCs using it in the future, so here's my proposal:

- Add a generic (const) compatible "mediatek,spi-ipm" to describe the hardware
- Add an enumeration with "mediatek,mt7986-spi-ipm" as the only member, as to
  prepare this binding for the future.
- Single and quad mode can be expressed with generic SPI bindings!

Specifically, you can express that with "spi-rx-bus-width" for SPI_RX_{....}
and "spi-tx-bus-width" for SPI_TX_{....}, so you don't need different compatibles
for "mediatek,mt7986-spi-single" and "mediatek,mt7896-spi-quad".

Fast example:

spi@12345678 {
    compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
    reg = <....>
    /* Quad mode */
    spi-rx-bus-width = <4>;
    spi-tx-bus-width = <4>;

    .... etc ....
}

Regards,
Angelo