Re: [PATCH v1 6/6] ARM: dts: lan966x: add basic Kontron KSwitch D10 support
From: Claudiu.Beznea
Date: Mon Mar 07 2022 - 07:07:56 EST
On 04.03.2022 13:15, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Am 2022-03-04 09:31, schrieb Claudiu.Beznea@xxxxxxxxxxxxx:
>> On 03.03.2022 18:03, Michael Walle wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know
>>> the content is safe
>>>
>>> Add basic support for the Kontron KSwitch D10 MMT 6G-2GS which
>>> features 6 Gigabit copper ports and two SFP cages. For now the
>>> following is working:
>>> - Kernel console
>>> - SFP cages I2C bus and mux
>>> - SPI
>>> - SGPIO
>>> - Watchdog
>>>
>>> Signed-off-by: Michael Walle <michael@xxxxxxxx>
>>> ---
>>> arch/arm/boot/dts/Makefile | 3 +-
>>> ...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 159
>>> ++++++++++++++++++
>>> 2 files changed, 161 insertions(+), 1 deletion(-)
>>> create mode 100644
>>> arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 085c43649d44..86dd0f9804ee 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -739,7 +739,8 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
>>> imx7ulp-com.dtb \
>>> imx7ulp-evk.dtb
>>> dtb-$(CONFIG_SOC_LAN966) += \
>>> - lan966x-pcb8291.dtb
>>> + lan966x-pcb8291.dtb \
>>> + lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
>>> dtb-$(CONFIG_SOC_LS1021A) += \
>>> ls1021a-moxa-uc-8410a.dtb \
>>> ls1021a-qds.dtb \
>>> diff --git
>>> a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
>>> b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
>>> new file mode 100644
>>> index 000000000000..958678dec7ad
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
>>> @@ -0,0 +1,159 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "lan966x.dtsi"
>>> +
>>> +/ {
>>> + model = "Kontron KSwitch D10 MMT 6G-2GS";
>>> + compatible = "kontron,kswitch-d10-mmt-6g-2gs",
>>> "kontron,s1921",
>>> + "microchip,lan9668", "microchip,lan966";
>>> +
>>> + aliases {
>>> + serial0 = &usart0;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +
>>> + gpio-restart {
>>> + compatible = "gpio-restart";
>>> + gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
>>> + priority = <200>;
>>> + };
>>> +
>>> + i2cmux {
>>> + compatible = "i2c-mux-gpio";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + mux-gpios = <&sgpio_out 3 2 GPIO_ACTIVE_HIGH>,
>>> + <&sgpio_out 3 3 GPIO_ACTIVE_HIGH>;
>>> + i2c-parent = <&i2c4>;
>>> +
>>> + i2c4_0: i2c@1 {
>>> + reg = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +
>>> + i2c4_1: i2c@2 {
>>> + reg = <2>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> + };
>>> +
>>> + sfp0: sfp0 {
>>> + compatible = "sff,sfp";
>>> + i2c-bus = <&i2c4_0>;
>>> + los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
>>> + mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
>>> + maximum-power-milliwatt = <2500>;
>>> + tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
>>> + tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
>>> + rate-select0-gpios = <&sgpio_out 2 0
>>> GPIO_ACTIVE_HIGH>;
>>> + rate-select1-gpios = <&sgpio_out 2 1
>>> GPIO_ACTIVE_HIGH>;
>>> + };
>>> +
>>> + sfp1: sfp1 {
>>> + compatible = "sff,sfp";
>>> + i2c-bus = <&i2c4_1>;
>>> + los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
>>> + mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
>>> + maximum-power-milliwatt = <2500>;
>>> + tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
>>> + tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
>>> + rate-select0-gpios = <&sgpio_out 2 2
>>> GPIO_ACTIVE_HIGH>;
>>> + rate-select1-gpios = <&sgpio_out 2 3
>>> GPIO_ACTIVE_HIGH>;
>>> + };
>>> +};
>>> +
>>> +&flx0 {
>>> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&flx3 {
>>> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&flx4 {
>>> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
>>> + status = "okay";
>>> +};
>>
>> Although there is 1:1 mapping b/w ids of flexcoms and the embedded
>> blocks
>> (flxX has usartX, i2cX, spiX) and there is nothing wrong with the
>> approach
>> here I found a bit hard to follow if the correspondent embedded block
>> (i2c, spi, usart) is enabled or not.
>
> I know and I had the same feeling, but I don't want to have the
> subnodes (matched by name) in these nodes. I.e. I want to avoid
> something like:
>
> &flx4 {
> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> status = "okay";
>
> i2c@600 {
> pinctrl-0 = <&fc4_b_pins>;
> pinctrl-names = "default";
> status = "okay";
> };
> };
All the other AT91 DTs are using the above format + the specific label in
front of the subnode, e.g:
i2cX: i2c@600 {
>
> If someone renames the subnode in the dtsi, it might easily be
> overlooked in the board files. Having the handle will raise an
> error.
If using label + node name as pointed above there will be an error thrown
for your scenario.
>
> And because the node references should be sorted alphabetically
> it will be cluttered around in the file. You could rename the
> references to flx4_i2c though. But I don't know it its worth
> the efforts. Let me know what you think.
>
> -michael
>
>>
>>> +
>>> +&gpio {
>>> + usart0_pins: usart0-pins {
>>> + /* RXD, TXD */
>>> + pins = "GPIO_25", "GPIO_26";
>>> + function = "fc0_b";
>>> + };
>>> +
>>> + sgpio_a_pins: sgpio-a-pins {
>>> + /* SCK, D0, D1, LD */
>>> + pins = "GPIO_32", "GPIO_33", "GPIO_34";
>>> + function = "sgpio_a";
>>> + };
>>> +
>>> + sgpio_b_pins: sgpio-b-pins {
>>> + /* SCK, D0, D1, LD */
>>> + pins = "GPIO_64";
>>> + function = "sgpio_b";
>>> + };
>>> +
>>> + fc3_b_pins: fc3-b-spi-pins {
>>> + /* SCK, MISO, MOSI */
>>> + pins = "GPIO_51", "GPIO_52", "GPIO_53";
>>> + function = "fc3_b";
>>> + };
>>> +
>>> + fc4_b_pins: fc4-b-i2c-pins {
>>> + /* RXD, TXD */
>>> + pins = "GPIO_57", "GPIO_58";
>>> + function = "fc4_b";
>>> + };
>>> +};
>>> +
>>> +&i2c4 {
>>> + pinctrl-0 = <&fc4_b_pins>;
>>> + pinctrl-names = "default";
>>> + status = "okay";
>>> +};
>>> +
>>> +&usart0 {
>>> + pinctrl-0 = <&usart0_pins>;
>>> + pinctrl-names = "default";
>>> + status = "okay";
>>> +};
>>> +
>>> +&sgpio {
>>> + pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
>>> + pinctrl-names = "default";
>>> + bus-frequency = <8000000>;
>>> + /* arbitrary range because all GPIOs are in software mode */
>>> + microchip,sgpio-port-ranges = <0 11>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&sgpio_in {
>>> + ngpios = <128>;
>>> +};
>>> +
>>> +&sgpio_out {
>>> + ngpios = <128>;
>>> +};
>>> +
>>> +&spi3 {
>>> + pinctrl-0 = <&fc3_b_pins>;
>>> + pinctrl-names = "default";
>>> + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&watchdog {
>>> + status = "okay";
>>> +};
>>> --
>>> 2.30.2
>>>