Re: [PATCH 1/2] dt-bindings: regulator: Add bindings for Richtek RT5190A PMIC

[ChiYuan Huang]

Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> 於 2022年3月7日 週一 下午7:14寫道：
>
> On 07/03/2022 11:08, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> >
> > Add bindings for Richtek RT5190A PMIC.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > ---
> >  .../regulator/richtek,rt5190a-regulator.yaml       | 138 +++++++++++++++++++++
> >  1 file changed, 138 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
> > new file mode 100644
> > index 00000000..b9f5836
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
> > @@ -0,0 +1,138 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Richtek RT5190A PMIC Regulator
> > +
> > +maintainers:
> > +  - ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > +
> > +description: |
> > +  The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
> > +  synchronous buck converters, 1 LDO, I2C control interface and peripherial
> > +  logical control.
> > +
> > +  It also supports mute AC OFF depop sound and quick setting storage while
> > +  input power is removed.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - richtek,rt5190a
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  vin2-supply:
> > +    description: phandle to buck2 input voltage.
> > +
> > +  vin3-supply:
> > +    description: phandle to buck3 input voltage.
> > +
> > +  vin4-supply:
> > +    description: phandle to buck4 input voltage.
> > +
> > +  vinldo-supply:
> > +    description: phandle to ldo input voltage
> > +
> > +  richtek,buck1-fixed-microvolt:
> > +    description: buck1 fixed voltage that depends on the external resistor.
> > +    $ref: "/schemas/types.yaml#/definitions/uint32"
>
> You should use standard bindings for it.
>
Sorry, I didn't get the point for the meaning 'standard binding'.
Do you mean to change 'richtek,buck1-fixed-microvolt' or 'uint32' definition?
This voltage depends on the external resistor selection. It's 'fixed'
by the application.
> > +
> > +  richtek,buck4-fixed-microvolt:
> > +    description: buck4 fixed voltage that depends on the external resistor.
> > +    $ref: "/schemas/types.yaml#/definitions/uint32"
> > +
> > +  richtek,ldo-fixed-microvolt:
> > +    description: ldo fixed voltage that depends on the external resistor.
> > +    $ref: "/schemas/types.yaml#/definitions/uint32"
> > +
> > +  richtek,mute-enable:
> > +    description: this can be used to enable mute function.
>
> Please describe what is "mute" function". Your description copied
> property name, so it is not useful.
>
OK, I'll describe more detailed.
> > +    type: boolean
> > +
> > +  regulators:
> > +    type: object
> > +
> > +    patternProperties:
> > +      "^buck[1-4]$|^ldo$":
> > +        type: object
> > +        $ref: regulator.yaml#
> > +        description: |
> > +          regulator description for buck[1-4] and ldo.
> > +
> > +        properties:
> > +          richtek,latchup-enable:
> > +            type: boolean
> > +            description: |
> > +              If specified, undervolt protection mode changes from the default
> > +              hiccup to latchup.
> > +
> > +        unevaluatedProperties: false
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - richtek,buck1-fixed-microvolt
> > +  - richtek,buck4-fixed-microvolt
> > +  - richtek,ldo-fixed-microvolt
> > +  - regulators
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      rt5190a@64 {
>
> Generic node name, so "pmic".
>
Ack in next.
> > +        compatible = "richtek,rt5190a";
> > +        reg = <0x64>;
> > +        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
> > +        vin2-supply = <&rt5190_buck1>;
> > +        vin3-supply = <&rt5190_buck1>;
> > +        vin4-supply = <&rt5190_buck1>;
> > +        richtek,buck1-fixed-microvolt = <5090000>;
> > +        richtek,buck4-fixed-microvolt = <850000>;
> > +        richtek,ldo-fixed-microvolt = <1200000>;
> > +
> > +        regulators {
> > +          rt5190_buck1: buck1 {
> > +            regulator-name = "rt5190a-buck1";
> > +            regulator-allowed-modes = <0 1>;
>
> Please describe these in header file in bindings and mention as one of
> regulator properties with description and enum.
>
OK, will add one dt-binding header file for the constant and mentioned
as one regulator property.
Ack in next.
>
>
> Best regards,
> Krzysztof