Re: [PATCH net-next 2/3] dt-bindings: net: micrel: Configure latency values and timestamping check for LAN8814 phy

[Rob Herring]

On Fri, Mar 04, 2022 at 03:04:17PM +0530, Divya Koppera wrote:
> Supports configuring latency values and also adds
> check for phy timestamping feature.
> 
> Signed-off-by: Divya Koppera<Divya.Koppera@xxxxxxxxxxxxx>

should be a space here:       ^

> ---
>  .../devicetree/bindings/net/micrel.txt          | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)

Please convert this to DT schema.

> 
> diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
> index 8d157f0295a5..c5ab62c39133 100644
> --- a/Documentation/devicetree/bindings/net/micrel.txt
> +++ b/Documentation/devicetree/bindings/net/micrel.txt
> @@ -45,3 +45,20 @@ Optional properties:
>  
>  	In fiber mode, auto-negotiation is disabled and the PHY can only work in
>  	100base-fx (full and half duplex) modes.
> +
> + - lan8814,ignore-ts: If present the PHY will not support timestamping.

'lan8814' is not a vendor and the format for properties is 
<vendor>,<propname>.

Is this configuration or lack of h/w feature? IOW, instead of 'will 
not', 'does not' or 'timestamping is disabled.'. As configuration, that 
seems like common property. For (lack of) h/w features, that should be 
implied by the compatible or VID/PID.

> +	This option acts as check whether Timestamping is supported by
> +	hardware or not. LAN8814 phy support hardware tmestamping.
> +
> + - lan8814,latency_rx_10: Configures Latency value of phy in ingress at 10 Mbps.

s/_/-/

What are the units here? Is this a common feature of PHYs?

> +
> + - lan8814,latency_tx_10: Configures Latency value of phy in egress at 10 Mbps.
> +
> + - lan8814,latency_rx_100: Configures Latency value of phy in ingress at 100 Mbps.
> +
> + - lan8814,latency_tx_100: Configures Latency value of phy in egress at 100 Mbps.
> +
> + - lan8814,latency_rx_1000: Configures Latency value of phy in ingress at 1000 Mbps.
> +
> + - lan8814,latency_tx_1000: Configures Latency value of phy in egress at 1000 Mbps.
> -- 
> 2.17.1
> 
>