Re: [PATCH v2 1/2] spi: Add optional number of additional clock cycles to be generated

[Rob Herring]

On Mon, 28 Feb 2022 16:15:45 +0100, Christophe Leroy wrote:
> Some components require a few clock cycles with chipselect off before
> or/and after the data transfer done with CS on.
> 
> Typically IDT 801034 QUAD PCM CODEC datasheet states "Note *: CCLK
> should have one cycle before CS goes low, and two cycles after
> CS goes high".
> 
> The cycles "before" are implicitely provided by all previous activity
> on the SPI bus. But the cycles "after" must be provided in order to
> achieve the SPI transfer.
> 
> In order to use that kind of component, implement a new option for
> SPI slaves in order to implement trailing clock of a given number of
> bits with ChipSelect off at the end of the transfer.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/spi/spi-peripheral-props.yaml      | 5 +++++
>  drivers/spi/spi.c                                          | 7 +++++--
>  include/linux/spi/spi.h                                    | 1 +
>  3 files changed, 11 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@xxxxxxxxxx>