Re: [PATCH v3 15/16] ASoC: dt-bindings: cs35l41: Document CS35l41 External Boost

[Rob Herring]

On Tue, Mar 08, 2022 at 05:17:29PM +0000, Lucas Tanure wrote:
> From: David Rhodes <drhodes@xxxxxxxxxxxxxxxxxxxxx>
> 
> Document internal and external boost feature for ASoC CS35L41.
> For internal boost the following properties are required:
> - cirrus,boost-peak-milliamp
> - cirrus,boost-ind-nanohenry
> - cirrus,boost-cap-microfarad
> 
> For external boost, the GPIO1 must be configured as output,
> so the following properties are required:
> - cirrus,gpio1-src-select = <1>
> - cirrus,gpio1-output-enable
> 
> Signed-off-by: David Rhodes <drhodes@xxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  .../bindings/sound/cirrus,cs35l41.yaml        | 44 +++++++++++++++++--
>  1 file changed, 41 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
> index 3235702ce402..09b515924c59 100644
> --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
> +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
> @@ -75,6 +75,19 @@ properties:
>      maximum: 3
>      default: 2
>  
> +  cirrus,boost-type:
> +    description:
> +      Configures the type of Boost being used.
> +      Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and
> +      boost-cap-microfarad.
> +      External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
> +      enable boost voltage.
> +      0 = Internal Boost
> +      1 = External Boost
> +    $ref: "/schemas/types.yaml#/definitions/uint32"
> +    minimum: 0
> +    maximum: 1

What does not present mean? Might be better to make this boolean depending
on what you are trying to accomplish.

> +
>    cirrus,gpio1-polarity-invert:
>      description:
>        Boolean which specifies whether the GPIO1
> @@ -131,9 +144,32 @@ required:
>    - compatible
>    - reg
>    - "#sound-dai-cells"
> -  - cirrus,boost-peak-milliamp
> -  - cirrus,boost-ind-nanohenry
> -  - cirrus,boost-cap-microfarad
> +
> +allOf:
> +  - if:
> +      properties:
> +        cirrus,boost-type:
> +            const: 0

Note that this will be true if cirrus,boost-type is not present. You 
probably want to add 'required'.

> +    then:
> +      required:
> +        - cirrus,boost-peak-milliamp
> +        - cirrus,boost-ind-nanohenry
> +        - cirrus,boost-cap-microfarad
> +    else:
> +      if:
> +        properties:
> +          cirrus,boost-type:
> +            const: 1
> +      then:
> +        required:
> +          - cirrus,gpio1-output-enable
> +          - cirrus,gpio1-src-select
> +        properties:
> +          cirrus,boost-peak-milliamp: false
> +          cirrus,boost-ind-nanohenry: false
> +          cirrus,boost-cap-microfarad: false
> +          cirrus,gpio1-src-select:
> +            enum: [1]
>  
>  additionalProperties: false
>  
> @@ -150,6 +186,8 @@ examples:
>            VA-supply = <&dummy_vreg>;
>            VP-supply = <&dummy_vreg>;
>            reset-gpios = <&gpio 110 0>;
> +
> +          cirrus,boost-type = <0>;
>            cirrus,boost-peak-milliamp = <4500>;
>            cirrus,boost-ind-nanohenry = <1000>;
>            cirrus,boost-cap-microfarad = <15>;
> -- 
> 2.35.1
> 
>