[PATCH] net: skb: move enum skb_drop_reason to uapi

From: menglong8 . dong
Date: Thu Mar 10 2022 - 22:30:31 EST


From: Menglong Dong <imagedong@xxxxxxxxxxx>

Move the definition of 'enum skb_drop_reason' in 'skbuff.h' to the uapi
header 'net_dropmon.h', therefore some users, such as eBPF program, can
make use of it.

Reviewed-by: Mengen Sun <mengensun@xxxxxxxxxxx>
Reviewed-by: Hao Peng <flyingpeng@xxxxxxxxxxx>
Signed-off-by: Menglong Dong <imagedong@xxxxxxxxxxx>
---
include/linux/skbuff.h | 141 +-----------------------------
include/uapi/linux/net_dropmon.h | 142 ++++++++++++++++++++++++++++++-
2 files changed, 142 insertions(+), 141 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 26538ceb4b01..fcac87a4c917 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -39,6 +39,7 @@
#include <linux/llist.h>
#include <net/flow.h>
#include <net/page_pool.h>
+#include <linux/net_dropmon.h>
#if IS_ENABLED(CONFIG_NF_CONNTRACK)
#include <linux/netfilter/nf_conntrack_common.h>
#endif
@@ -307,146 +308,6 @@ struct sk_buff_head {

struct sk_buff;

-/* The reason of skb drop, which is used in kfree_skb_reason().
- * en...maybe they should be splited by group?
- *
- * Each item here should also be in 'TRACE_SKB_DROP_REASON', which is
- * used to translate the reason to string.
- */
-enum skb_drop_reason {
- SKB_NOT_DROPPED_YET = 0,
- SKB_DROP_REASON_NOT_SPECIFIED, /* drop reason is not specified */
- SKB_DROP_REASON_NO_SOCKET, /* socket not found */
- SKB_DROP_REASON_PKT_TOO_SMALL, /* packet size is too small */
- SKB_DROP_REASON_TCP_CSUM, /* TCP checksum error */
- SKB_DROP_REASON_SOCKET_FILTER, /* dropped by socket filter */
- SKB_DROP_REASON_UDP_CSUM, /* UDP checksum error */
- SKB_DROP_REASON_NETFILTER_DROP, /* dropped by netfilter */
- SKB_DROP_REASON_OTHERHOST, /* packet don't belong to current
- * host (interface is in promisc
- * mode)
- */
- SKB_DROP_REASON_IP_CSUM, /* IP checksum error */
- SKB_DROP_REASON_IP_INHDR, /* there is something wrong with
- * IP header (see
- * IPSTATS_MIB_INHDRERRORS)
- */
- SKB_DROP_REASON_IP_RPFILTER, /* IP rpfilter validate failed.
- * see the document for rp_filter
- * in ip-sysctl.rst for more
- * information
- */
- SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST, /* destination address of L2
- * is multicast, but L3 is
- * unicast.
- */
- SKB_DROP_REASON_XFRM_POLICY, /* xfrm policy check failed */
- SKB_DROP_REASON_IP_NOPROTO, /* no support for IP protocol */
- SKB_DROP_REASON_SOCKET_RCVBUFF, /* socket receive buff is full */
- SKB_DROP_REASON_PROTO_MEM, /* proto memory limition, such as
- * udp packet drop out of
- * udp_memory_allocated.
- */
- SKB_DROP_REASON_TCP_MD5NOTFOUND, /* no MD5 hash and one
- * expected, corresponding
- * to LINUX_MIB_TCPMD5NOTFOUND
- */
- SKB_DROP_REASON_TCP_MD5UNEXPECTED, /* MD5 hash and we're not
- * expecting one, corresponding
- * to LINUX_MIB_TCPMD5UNEXPECTED
- */
- SKB_DROP_REASON_TCP_MD5FAILURE, /* MD5 hash and its wrong,
- * corresponding to
- * LINUX_MIB_TCPMD5FAILURE
- */
- SKB_DROP_REASON_SOCKET_BACKLOG, /* failed to add skb to socket
- * backlog (see
- * LINUX_MIB_TCPBACKLOGDROP)
- */
- SKB_DROP_REASON_TCP_FLAGS, /* TCP flags invalid */
- SKB_DROP_REASON_TCP_ZEROWINDOW, /* TCP receive window size is zero,
- * see LINUX_MIB_TCPZEROWINDOWDROP
- */
- SKB_DROP_REASON_TCP_OLD_DATA, /* the TCP data reveived is already
- * received before (spurious retrans
- * may happened), see
- * LINUX_MIB_DELAYEDACKLOST
- */
- SKB_DROP_REASON_TCP_OVERWINDOW, /* the TCP data is out of window,
- * the seq of the first byte exceed
- * the right edges of receive
- * window
- */
- SKB_DROP_REASON_TCP_OFOMERGE, /* the data of skb is already in
- * the ofo queue, corresponding to
- * LINUX_MIB_TCPOFOMERGE
- */
- SKB_DROP_REASON_IP_OUTNOROUTES, /* route lookup failed */
- SKB_DROP_REASON_BPF_CGROUP_EGRESS, /* dropped by
- * BPF_PROG_TYPE_CGROUP_SKB
- * eBPF program
- */
- SKB_DROP_REASON_IPV6DISABLED, /* IPv6 is disabled on the device */
- SKB_DROP_REASON_NEIGH_CREATEFAIL, /* failed to create neigh
- * entry
- */
- SKB_DROP_REASON_NEIGH_FAILED, /* neigh entry in failed state */
- SKB_DROP_REASON_NEIGH_QUEUEFULL, /* arp_queue for neigh
- * entry is full
- */
- SKB_DROP_REASON_NEIGH_DEAD, /* neigh entry is dead */
- SKB_DROP_REASON_TC_EGRESS, /* dropped in TC egress HOOK */
- SKB_DROP_REASON_QDISC_DROP, /* dropped by qdisc when packet
- * outputting (failed to enqueue to
- * current qdisc)
- */
- SKB_DROP_REASON_CPU_BACKLOG, /* failed to enqueue the skb to
- * the per CPU backlog queue. This
- * can be caused by backlog queue
- * full (see netdev_max_backlog in
- * net.rst) or RPS flow limit
- */
- SKB_DROP_REASON_XDP, /* dropped by XDP in input path */
- SKB_DROP_REASON_TC_INGRESS, /* dropped in TC ingress HOOK */
- SKB_DROP_REASON_PTYPE_ABSENT, /* not packet_type found to handle
- * the skb. For an etner packet,
- * this means that L3 protocol is
- * not supported
- */
- SKB_DROP_REASON_SKB_CSUM, /* sk_buff checksum computation
- * error
- */
- SKB_DROP_REASON_SKB_GSO_SEG, /* gso segmentation error */
- SKB_DROP_REASON_SKB_UCOPY_FAULT, /* failed to copy data from
- * user space, e.g., via
- * zerocopy_sg_from_iter()
- * or skb_orphan_frags_rx()
- */
- SKB_DROP_REASON_DEV_HDR, /* device driver specific
- * header/metadata is invalid
- */
- /* the device is not ready to xmit/recv due to any of its data
- * structure that is not up/ready/initialized, e.g., the IFF_UP is
- * not set, or driver specific tun->tfiles[txq] is not initialized
- */
- SKB_DROP_REASON_DEV_READY,
- SKB_DROP_REASON_FULL_RING, /* ring buffer is full */
- SKB_DROP_REASON_NOMEM, /* error due to OOM */
- SKB_DROP_REASON_HDR_TRUNC, /* failed to trunc/extract the header
- * from networking data, e.g., failed
- * to pull the protocol header from
- * frags via pskb_may_pull()
- */
- SKB_DROP_REASON_TAP_FILTER, /* dropped by (ebpf) filter directly
- * attached to tun/tap, e.g., via
- * TUNSETFILTEREBPF
- */
- SKB_DROP_REASON_TAP_TXFILTER, /* dropped by tx filter implemented
- * at tun/tap, e.g., check_filter()
- */
- SKB_DROP_REASON_MAX,
-};
-
/* To allow 64K frame to be packed as single skb without frag_list we
* require 64K/PAGE_SIZE pages plus 1 additional page to allow for
* buffers which do not start on a page boundary.
diff --git a/include/uapi/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
index 1bbea8f0681e..66092d1e1995 100644
--- a/include/uapi/linux/net_dropmon.h
+++ b/include/uapi/linux/net_dropmon.h
@@ -3,7 +3,7 @@
#define __NET_DROPMON_H

#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/netlink.h>

struct net_dm_drop_point {
__u8 pc[8];
@@ -130,4 +130,144 @@ enum net_dm_origin {
NET_DM_ORIGIN_HW,
};

+/* The reason of skb drop, which is used in kfree_skb_reason().
+ * en...maybe they should be splited by group?
+ *
+ * Each item here should also be in 'TRACE_SKB_DROP_REASON', which is
+ * used to translate the reason to string.
+ */
+enum skb_drop_reason {
+ SKB_NOT_DROPPED_YET = 0,
+ SKB_DROP_REASON_NOT_SPECIFIED, /* drop reason is not specified */
+ SKB_DROP_REASON_NO_SOCKET, /* socket not found */
+ SKB_DROP_REASON_PKT_TOO_SMALL, /* packet size is too small */
+ SKB_DROP_REASON_TCP_CSUM, /* TCP checksum error */
+ SKB_DROP_REASON_SOCKET_FILTER, /* dropped by socket filter */
+ SKB_DROP_REASON_UDP_CSUM, /* UDP checksum error */
+ SKB_DROP_REASON_NETFILTER_DROP, /* dropped by netfilter */
+ SKB_DROP_REASON_OTHERHOST, /* packet don't belong to current
+ * host (interface is in promisc
+ * mode)
+ */
+ SKB_DROP_REASON_IP_CSUM, /* IP checksum error */
+ SKB_DROP_REASON_IP_INHDR, /* there is something wrong with
+ * IP header (see
+ * IPSTATS_MIB_INHDRERRORS)
+ */
+ SKB_DROP_REASON_IP_RPFILTER, /* IP rpfilter validate failed.
+ * see the document for rp_filter
+ * in ip-sysctl.rst for more
+ * information
+ */
+ SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST, /* destination address of L2
+ * is multicast, but L3 is
+ * unicast.
+ */
+ SKB_DROP_REASON_XFRM_POLICY, /* xfrm policy check failed */
+ SKB_DROP_REASON_IP_NOPROTO, /* no support for IP protocol */
+ SKB_DROP_REASON_SOCKET_RCVBUFF, /* socket receive buff is full */
+ SKB_DROP_REASON_PROTO_MEM, /* proto memory limition, such as
+ * udp packet drop out of
+ * udp_memory_allocated.
+ */
+ SKB_DROP_REASON_TCP_MD5NOTFOUND, /* no MD5 hash and one
+ * expected, corresponding
+ * to LINUX_MIB_TCPMD5NOTFOUND
+ */
+ SKB_DROP_REASON_TCP_MD5UNEXPECTED, /* MD5 hash and we're not
+ * expecting one, corresponding
+ * to LINUX_MIB_TCPMD5UNEXPECTED
+ */
+ SKB_DROP_REASON_TCP_MD5FAILURE, /* MD5 hash and its wrong,
+ * corresponding to
+ * LINUX_MIB_TCPMD5FAILURE
+ */
+ SKB_DROP_REASON_SOCKET_BACKLOG, /* failed to add skb to socket
+ * backlog (see
+ * LINUX_MIB_TCPBACKLOGDROP)
+ */
+ SKB_DROP_REASON_TCP_FLAGS, /* TCP flags invalid */
+ SKB_DROP_REASON_TCP_ZEROWINDOW, /* TCP receive window size is zero,
+ * see LINUX_MIB_TCPZEROWINDOWDROP
+ */
+ SKB_DROP_REASON_TCP_OLD_DATA, /* the TCP data reveived is already
+ * received before (spurious retrans
+ * may happened), see
+ * LINUX_MIB_DELAYEDACKLOST
+ */
+ SKB_DROP_REASON_TCP_OVERWINDOW, /* the TCP data is out of window,
+ * the seq of the first byte exceed
+ * the right edges of receive
+ * window
+ */
+ SKB_DROP_REASON_TCP_OFOMERGE, /* the data of skb is already in
+ * the ofo queue, corresponding to
+ * LINUX_MIB_TCPOFOMERGE
+ */
+ SKB_DROP_REASON_IP_OUTNOROUTES, /* route lookup failed */
+ SKB_DROP_REASON_BPF_CGROUP_EGRESS, /* dropped by
+ * BPF_PROG_TYPE_CGROUP_SKB
+ * eBPF program
+ */
+ SKB_DROP_REASON_IPV6DISABLED, /* IPv6 is disabled on the device */
+ SKB_DROP_REASON_NEIGH_CREATEFAIL, /* failed to create neigh
+ * entry
+ */
+ SKB_DROP_REASON_NEIGH_FAILED, /* neigh entry in failed state */
+ SKB_DROP_REASON_NEIGH_QUEUEFULL, /* arp_queue for neigh
+ * entry is full
+ */
+ SKB_DROP_REASON_NEIGH_DEAD, /* neigh entry is dead */
+ SKB_DROP_REASON_TC_EGRESS, /* dropped in TC egress HOOK */
+ SKB_DROP_REASON_QDISC_DROP, /* dropped by qdisc when packet
+ * outputting (failed to enqueue to
+ * current qdisc)
+ */
+ SKB_DROP_REASON_CPU_BACKLOG, /* failed to enqueue the skb to
+ * the per CPU backlog queue. This
+ * can be caused by backlog queue
+ * full (see netdev_max_backlog in
+ * net.rst) or RPS flow limit
+ */
+ SKB_DROP_REASON_XDP, /* dropped by XDP in input path */
+ SKB_DROP_REASON_TC_INGRESS, /* dropped in TC ingress HOOK */
+ SKB_DROP_REASON_PTYPE_ABSENT, /* not packet_type found to handle
+ * the skb. For an etner packet,
+ * this means that L3 protocol is
+ * not supported
+ */
+ SKB_DROP_REASON_SKB_CSUM, /* sk_buff checksum computation
+ * error
+ */
+ SKB_DROP_REASON_SKB_GSO_SEG, /* gso segmentation error */
+ SKB_DROP_REASON_SKB_UCOPY_FAULT, /* failed to copy data from
+ * user space, e.g., via
+ * zerocopy_sg_from_iter()
+ * or skb_orphan_frags_rx()
+ */
+ SKB_DROP_REASON_DEV_HDR, /* device driver specific
+ * header/metadata is invalid
+ */
+ /* the device is not ready to xmit/recv due to any of its data
+ * structure that is not up/ready/initialized, e.g., the IFF_UP is
+ * not set, or driver specific tun->tfiles[txq] is not initialized
+ */
+ SKB_DROP_REASON_DEV_READY,
+ SKB_DROP_REASON_FULL_RING, /* ring buffer is full */
+ SKB_DROP_REASON_NOMEM, /* error due to OOM */
+ SKB_DROP_REASON_HDR_TRUNC, /* failed to trunc/extract the header
+ * from networking data, e.g., failed
+ * to pull the protocol header from
+ * frags via pskb_may_pull()
+ */
+ SKB_DROP_REASON_TAP_FILTER, /* dropped by (ebpf) filter directly
+ * attached to tun/tap, e.g., via
+ * TUNSETFILTEREBPF
+ */
+ SKB_DROP_REASON_TAP_TXFILTER, /* dropped by tx filter implemented
+ * at tun/tap, e.g., check_filter()
+ */
+ SKB_DROP_REASON_MAX,
+};
+
#endif
--
2.35.1