Re: [PATCH v2 1/2] dt-bindings: Add power-efuse binding
From: Zev Weiss
Date: Fri Mar 11 2022 - 17:43:39 EST
On Fri, Mar 11, 2022 at 07:24:41AM PST, Rob Herring wrote:
On Mon, Mar 07, 2022 at 05:18:09PM -0800, Zev Weiss wrote:
This can be used to describe a power output supplied by a regulator
device that the system controls.
Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/misc/power-efuse.yaml | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/power-efuse.yaml
diff --git a/Documentation/devicetree/bindings/misc/power-efuse.yaml b/Documentation/devicetree/bindings/misc/power-efuse.yaml
new file mode 100644
index 000000000000..5f8f0b21af0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/power-efuse.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/power-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic power efuse device
+
+maintainers:
+ - Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
+
+description: |
+ This binding describes a physical power output supplied by a
+ regulator providing efuse functionality (manual on/off control, and
+ auto-shutoff if current, voltage, or thermal limits are exceeded).
+
+ These may be found on systems such as "smart" network PDUs, and
+ typically supply power to devices entirely separate from the system
+ described by the device-tree by way of an external connector such as
+ an Open19 power cable:
+
+ https://www.open19.org/marketplace/coolpower-cable-assembly-8ru/
Not really a helpful link...
I still don't understand what the h/w looks like here. At least I now
understand we're talking a fuse on power rail, not efuses in an SoC
used as OTP bits or feature disables.
The systems this would actually be used for would be things like these:
- https://www.open19.org/marketplace/delta-16kw-power-shelf/
- https://www.open19.org/marketplace/inspur-open19-power-shelf-ob19200l1/
The rightmost pictures on those pages show the four black connectors
where the cable assembly linked in the patch plugs in, each of which
provides the outputs from 12 such efuses, on 12 pairs of ground and
+12VDC pins. (There are also two more single outputs off to the side.)
It essentially just amounts to an external power output supplied by a
regulator, with the regulator providing an on/off switch, overcurrent
protection, etc.
And yes, the ambiguity of the "efuse" terminology is unfortunate (the
"power-" prefix was an attempt to clarify it slightly). That's the term
used in the documentation for the hardware and hence is what I've called
it here, but I'd be open to using a different name if that would help.
+
+properties:
+ compatible:
+ const: power-efuse
+
+ vout-supply:
+ description:
+ phandle to the regulator providing power for the efuse
Vout is a supply to the efuse and not the rail being fused?
Yeah, that was a fairly muddled description -- it's really the latter.
Perhaps:
phandle to the regulator providing power for the output rail
controlled by the efuse
?
Sorry, I know nothing about how an efuse is implemented so you are going
to have to explain or draw it.
+
+ error-flags-cache-ttl-ms:
+ description:
+ The number of milliseconds the vout-supply regulator's error
+ flags should be cached before re-fetching them.
How does one fetch/read? the error flags?
In the specific case I'm dealing with, via PMBus STATUS_* commands,
though I was aiming to keep this more generic so it could potentially be
used to describe non-PMBus arrangements (in the Linux case, via whatever
mechanism the implementation of the regulator's .get_error_flags()
function uses).
+
+required:
+ - compatible
+ - vout-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ efuse {
+ compatible = "power-efuse";
+ vout-supply = <&efuse_reg>;
+ error-flags-cache-ttl-ms = <500>;
+ };
--
2.35.1