RE: [PATCH v11 1/2] dt-bindings: misc: Add iop yaml file for Sunplus SP7021

[Tony Huang 黃懷厚]

Dear Krzysztof:

> On 12/03/2022 17:16, Tony Huang wrote:
> > Add iop yaml file for Sunplus SP7021
> >
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > Signed-off-by: Tony Huang <tonyhuang.sunplus@xxxxxxxxx>
> > ---
> > Changes in v11:
> >  - Addressed comments from krzysztof.
> >
> >  .../devicetree/bindings/misc/sunplus,iop.yaml      | 78
> ++++++++++++++++++++++
> >  MAINTAINERS                                        |  5 ++
> >  2 files changed, 83 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/misc/sunplus,iop.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/misc/sunplus,iop.yaml
> > b/Documentation/devicetree/bindings/misc/sunplus,iop.yaml
> > new file mode 100644
> > index 0000000..ad1c4be
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/misc/sunplus,iop.yaml
> > @@ -0,0 +1,78 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright
> > +(C) Sunplus Ltd. Co. 2021 %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/misc/sunplus-iop.yaml#
> 
> Still wrong path. This would be easily spotted if you test the bindings.
> Please run dt_binding_check. It's a requirement.

I have run dt_binding_check and don't see error.
Below is my modification
$id: http://devicetree.org/schemas/misc/sunplus,iop.yaml#

> 
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sunplus IOP(8051) controller
> > +
> > +maintainers:
> > +  - Tony Huang <tonyhuang.sunplus@xxxxxxxxx>
> > +
> > +description: |
> > +  Processor for I/O control, RTC wake-up procedure management,
> > +  and cooperation with CPU&PMC in power management.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sunplus,sp7021-iop
> > +
> > +  reg:
> > +    items:
> > +      - description: IOP registers regions
> > +      - description: PMC registers regions
> > +      - description: MOON0 registers regions
> > +
> > +  reg-names:
> > +    items:
> > +      - const: iop
> > +      - const: iop_pmc
> > +      - const: moon0
> > +
> > +  interrupts:
> > +    items:
> > +      - description: IOP_INT0. IOP to system Interrupt 0.
> > +                     Sent by IOP to system RISC.
> > +      - description: IOP_INT1. IOP to System Interrupt 1.
> > +                     Sent by IOP to system RISC.
> > +
> > +  memory-region:
> > +    maxItems: 1
> > +
> > +  wakeup-gpios:
> > +    description: When the linux kernel system is powered off.
> > +      8051 is always powered. 8051 cand receive external signals
> > +      according to this gpio pin. 8051 receives external signal
> > +      through gpio pin. 8051 can power on linux kernel system.
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - clocks
> > +  - interrupts
> > +  - memory-region
> > +  - wakeup-gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    iop: iop@9c000400 {
> > +        compatible = "sunplus,sp7021-iop";
> > +        reg = <0x9c000400 0x80>, <0x9c003100 0x80>, <0x9c000000
> 0x80>;
> > +        reg-names = "iop", "iop_pmc", "moon0";
> > +        clocks = <&clkc 0x14>;
> > +        interrupt-parent = <&intc>;
> > +        interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, <42
> IRQ_TYPE_LEVEL_HIGH>;
> > +        memory-region = <&iop_reserve>;
> > +        pinctrl-names = "default";
> > +        pinctrl-0 = <&iop_pins>;
> > +        wakeup-gpios = <&pctl 1 GPIO_ACTIVE_HIGH>;
> > +    };
> > \ No newline at end of file

I will modify.