Re: [PATCH v4 5/7] remoteproc: mtk_apu: Use match_data

From: Bjorn Andersson
Date: Mon Mar 14 2022 - 18:27:46 EST


On Fri 04 Mar 10:15 CST 2022, Alexandre Bailon wrote:

> From: Julien STEPHAN <jstephan@xxxxxxxxxxxx>
>
> This commits prepare the driver to be more generic in order to support
> multiple platform using the compatible property.
> To do that, put some register values and the clocks names inside
> private data.
>
> Signed-off-by: Julien STEPHAN <jstephan@xxxxxxxxxxxx>
> Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
> ---
> drivers/remoteproc/mtk_apu.c | 35 ++++++++++++++++++++++++++++-------
> 1 file changed, 28 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/remoteproc/mtk_apu.c b/drivers/remoteproc/mtk_apu.c
> index 3905eb5b7174..deec51b86ba5 100644
> --- a/drivers/remoteproc/mtk_apu.c
> +++ b/drivers/remoteproc/mtk_apu.c
> @@ -58,12 +58,20 @@
>
> #define APU_RESET_DELAY (27)
>
> +struct mtk_apu_conf {
> + u32 core_default0;
> + u32 core_default1;
> + u32 num_clks;
> + const char * const *clk_names;
> +};
> +
> struct mtk_apu_rproc {
> struct device *dev;
> void __iomem *base;
> int irq;
> unsigned int num_clks;
> struct clk_bulk_data *clks;
> + struct mtk_apu_conf *conf;
> struct iommu_domain *domain;
> struct list_head mappings;
>
> @@ -81,6 +89,13 @@ static const char * const mt8183_clk_names[] = {
> "jtag"
> };
>
> +static const struct mtk_apu_conf mt8183_conf = {
> + .core_default0 = (0x10 << 23) | (0x10 << 18),

CORE_DEFAULT0_AWUSER_USE_IOMMU | CORE_DEFAULT0_ARUSER_USE_IOMMU ?

> + .core_default1 = (0x10 << 0) | (0x10 << 5),

CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU | CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU ?

Regards,
Bjorn

> + .num_clks = ARRAY_SIZE(mt8183_clk_names),
> + .clk_names = mt8183_clk_names
> +};
> +
> static int mtk_apu_iommu_map(struct rproc *rproc, struct rproc_mem_entry *entry)
> {
> struct mtk_apu_rproc *apu_rproc = rproc->priv;
> @@ -289,10 +304,9 @@ static int mtk_apu_rproc_start(struct rproc *rproc)
> writel(core_ctrl, apu_rproc->base + CORE_CTRL);
>
> /* Configure memory accesses to go through the IOMMU */
> - writel(CORE_DEFAULT0_AWUSER_USE_IOMMU | CORE_DEFAULT0_ARUSER_USE_IOMMU |
> - CORE_DEFAULT0_QOS_SWAP_1, apu_rproc->base + CORE_DEFAULT0);
> - writel(CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
> - CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU,
> + writel(apu_rproc->conf->core_default0 | CORE_DEFAULT0_QOS_SWAP_1,
> + apu_rproc->base + CORE_DEFAULT0);
> + writel(apu_rproc->conf->core_default1,
> apu_rproc->base + CORE_DEFAULT1);
>
> /* Release the APU */
> @@ -565,11 +579,18 @@ static int mtk_apu_rproc_probe(struct platform_device *pdev)
> goto free_rproc;
> }
>
> - apu_rproc->num_clks = ARRAY_SIZE(mt8183_clk_names);
> +
> + apu_rproc->conf = (struct mtk_apu_conf *)device_get_match_data(dev);
> + if (!apu_rproc->conf) {
> + ret = -ENODEV;
> + goto free_rproc;
> + }
> +
> + apu_rproc->num_clks = apu_rproc->conf->num_clks;
> apu_rproc->clks = devm_kcalloc(dev, apu_rproc->num_clks,
> sizeof(*apu_rproc->clks), GFP_KERNEL);
> for (i = 0; i < apu_rproc->num_clks; ++i)
> - apu_rproc->clks[i].id = mt8183_clk_names[i];
> + apu_rproc->clks[i].id = apu_rproc->conf->clk_names[i];
>
> ret = devm_clk_bulk_get(dev, apu_rproc->num_clks, apu_rproc->clks);
> if (ret) {
> @@ -611,7 +632,7 @@ static int mtk_apu_rproc_remove(struct platform_device *pdev)
> }
>
> static const struct of_device_id mtk_apu_rproc_of_match[] = {
> - { .compatible = "mediatek,mt8183-apu", },
> + { .compatible = "mediatek,mt8183-apu", .data = &mt8183_conf },
> { /* sentinel */ },
> };
> MODULE_DEVICE_TABLE(of, mtk_apu_rproc_of_match);
> --
> 2.34.1
>