Re: [PATCH 2/3] irqchip/gic-v3: Detect LPI invalidation MMIO registers

[Lorenzo Pieralisi]

On Tue, Mar 15, 2022 at 04:50:33PM +0000, Marc Zyngier wrote:
> Since GICv4.1, an implementation can offer the same MMIO-based
> implementation as DirectLPI, only with an ITS. Given that this
> can be hugely beneficial for workloads that are very LPI masking
> heavy (although these workloads are admitedly a bit odd).
> 
> Interestingly, this is independent of RVPEI, which only *implies*
> the functionnality.
> 
> So let's detect whether the implementation has GICR_CTLR.IR set,
> and propagate this as DirectLPI to the ITS driver.
> 
> Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
> ---
>  drivers/irqchip/irq-gic-v3.c       | 15 +++++++++++----
>  include/linux/irqchip/arm-gic-v3.h |  2 ++
>  2 files changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 736163d36b13..363bfe172033 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -918,7 +918,11 @@ static int gic_populate_rdist(void)
>  static int __gic_update_rdist_properties(struct redist_region *region,
>  					 void __iomem *ptr)
>  {
> -	u64 typer = gic_read_typer(ptr + GICR_TYPER);
> +	u64 typer;
> +	u32 ctlr;
> +
> +	typer = gic_read_typer(ptr + GICR_TYPER);
> +	ctlr = readl_relaxed(ptr + GICR_CTLR);
>  
>  	/* Boot-time cleanip */
>  	if ((typer & GICR_TYPER_VLPIS) && (typer & GICR_TYPER_RVPEID)) {
> @@ -941,6 +945,7 @@ static int __gic_update_rdist_properties(struct redist_region *region,
>  	/* RVPEID implies some form of DirectLPI, no matter what the doc says... :-/ */
>  	gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID);
>  	gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) |
> +					   !!(ctlr & GICR_CTLR_IR) |
>  					   gic_data.rdists.has_rvpeid);
>  	gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY);
>  
> @@ -962,7 +967,11 @@ static void gic_update_rdist_properties(void)
>  	gic_iterate_rdists(__gic_update_rdist_properties);
>  	if (WARN_ON(gic_data.ppi_nr == UINT_MAX))
>  		gic_data.ppi_nr = 0;
> -	pr_info("%d PPIs implemented\n", gic_data.ppi_nr);
> +	pr_info("GICv3 features: %d PPIs, %s%s\n",
> +		gic_data.ppi_nr,
> +		gic_data.has_rss ? "RSS " : "",
> +		gic_data.rdists.has_direct_lpi ? "DirectLPI " : "");

I understand GICR_CTLR.IR detection (which is v4.1 feature) - I don't
get why in this patch we are adding a GICv3 DirectLPI info dump (hunk
above), it is probably nitpicking but the hunk above does not seem to
belong in this patch - it is a separate print info refactoring or I am
reading it wrongly.

Lorenzo

> +	
>  	if (gic_data.rdists.has_vlpis)
>  		pr_info("GICv4 features: %s%s%s\n",
>  			gic_data.rdists.has_direct_lpi ? "DirectLPI " : "",
> @@ -1797,8 +1806,6 @@ static int __init gic_init_bases(void __iomem *dist_base,
>  	irq_domain_update_bus_token(gic_data.domain, DOMAIN_BUS_WIRED);
>  
>  	gic_data.has_rss = !!(typer & GICD_TYPER_RSS);
> -	pr_info("Distributor has %sRange Selector support\n",
> -		gic_data.has_rss ? "" : "no ");
>  
>  	if (typer & GICD_TYPER_MBIS) {
>  		err = mbi_init(handle, gic_data.domain);
> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
> index 12d91f0dedf9..aeb8ced53880 100644
> --- a/include/linux/irqchip/arm-gic-v3.h
> +++ b/include/linux/irqchip/arm-gic-v3.h
> @@ -127,6 +127,8 @@
>  #define GICR_PIDR2			GICD_PIDR2
>  
>  #define GICR_CTLR_ENABLE_LPIS		(1UL << 0)
> +#define GICR_CTLR_IR			(1UL << 1)
> +#define GICR_CTLR_CES			(1UL << 2)
>  #define GICR_CTLR_RWP			(1UL << 3)
>  
>  #define GICR_TYPER_CPU_NUMBER(r)	(((r) >> 8) & 0xffff)
> -- 
> 2.34.1
>