Re: [PATCH 5/6] arm64: dts: qcom: sm6350: Add UFS nodes

[Krzysztof Kozlowski]

On 18/03/2022 19:30, Luca Weiss wrote:
> Add the necessary nodes for UFS and its PHY.
> 
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6350.dtsi | 79 ++++++++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index d7c9edff19f7..c5c93b6bcd2a 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -541,6 +541,85 @@ uart2: serial@98c000 {
>  			};
>  		};
>  
> +		ufs_mem_hc: ufshc@1d84000 {

Generic node name, so ufs.

> +			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
> +				     "jedec,ufs-2.0";
> +			reg = <0 0x01d84000 0 0x3000>,
> +			      <0 0x01d90000 0 0x8000>;
> +			reg-names = "std", "ice";
> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_mem_phy_lanes>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <2>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc UFS_PHY_GDSC>;
> +
> +			iommus = <&apps_smmu 0x80 0x0>;
> +
> +			clock-names =

Drop unneeded blank line, start just after '=' and align next elements
with it.

> +				"core_clk",
> +				"bus_aggr_clk",
> +				"iface_clk",
> +				"core_clk_unipro",
> +				"core_clk_ice",
> +				"ref_clk",
> +				"tx_lane0_sync_clk",
> +				"rx_lane0_sync_clk",
> +				"rx_lane1_sync_clk";
> +			clocks =

The same.


Best regards,
Krzysztof