RE: [PATCH 2/2] vdpa: mlx5: synchronize driver status with CVQ

From: Eli Cohen
Date: Mon Mar 21 2022 - 02:56:32 EST


> From: Jason Wang <jasowang@xxxxxxxxxx>
> Sent: Monday, March 21, 2022 8:04 AM
> To: mst@xxxxxxxxxx; jasowang@xxxxxxxxxx
> Cc: Eli Cohen <elic@xxxxxxxxxx>; virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH 2/2] vdpa: mlx5: synchronize driver status with CVQ
>
> Currently, CVQ doesn't have any synchronization with the driver
> status. Then CVQ emulation code run in the middle of:
>
> 1) device reset
> 2) device status changed
> 3) map updating
>
> The will lead several unexpected issue like trying to execute CVQ
> command after the driver has been teared down.
>
> Fixing this by using reslock to synchronize CVQ emulation code with
> the driver status changing:
>
> - protect the whole device reset, status changing and map updating
> with reslock
> - protect the CVQ handler with the reslock and check
> VIRTIO_CONFIG_S_DRIVER_OK in the CVQ handler
>
> This will guarantee that:
>
> 1) CVQ handler won't work if VIRTIO_CONFIG_S_DRIVER_OK is not set
> 2) CVQ handler will see a consistent state of the driver instead of
> the partial one when it is running in the middle of the
> teardown_driver() or setup_driver().
>
> Cc: 5262912ef3cfc ("vdpa/mlx5: Add support for control VQ and MAC setting")
> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> ---

Reviewed-by: Eli Cohen <elic@xxxxxxxxxx>

> drivers/vdpa/mlx5/net/mlx5_vnet.c | 42 +++++++++++++++++++++++--------
> 1 file changed, 31 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index d5a6fb3f9c41..524240f55c1c 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -1618,11 +1618,17 @@ static void mlx5_cvq_kick_handler(struct work_struct *work)
> mvdev = wqent->mvdev;
> ndev = to_mlx5_vdpa_ndev(mvdev);
> cvq = &mvdev->cvq;
> +
> + mutex_lock(&ndev->reslock);
> +
> + if (!(mvdev->status & VIRTIO_CONFIG_S_DRIVER_OK))
> + goto done;
> +
> if (!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ)))
> - return;
> + goto done;
>
> if (!cvq->ready)
> - return;
> + goto done;
>
> while (true) {
> err = vringh_getdesc_iotlb(&cvq->vring, &cvq->riov, &cvq->wiov, &cvq->head,
> @@ -1663,6 +1669,9 @@ static void mlx5_cvq_kick_handler(struct work_struct *work)
> break;
> }
> }
> +
> +done:
> + mutex_unlock(&ndev->reslock);
> }
>
> static void mlx5_vdpa_kick_vq(struct vdpa_device *vdev, u16 idx)
> @@ -2125,6 +2134,8 @@ static int mlx5_vdpa_change_map(struct mlx5_vdpa_dev *mvdev, struct vhost_iotlb
> struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
> int err;
>
> + mutex_lock(&ndev->reslock);
> +
> suspend_vqs(ndev);
> err = save_channels_info(ndev);
> if (err)
> @@ -2137,18 +2148,20 @@ static int mlx5_vdpa_change_map(struct mlx5_vdpa_dev *mvdev, struct vhost_iotlb
> goto err_mr;
>
> if (!(mvdev->status & VIRTIO_CONFIG_S_DRIVER_OK))
> - return 0;
> + goto err_mr;
>
> restore_channels_info(ndev);
> err = setup_driver(mvdev);
> if (err)
> goto err_setup;
>
> + mutex_unlock(&ndev->reslock);
> return 0;
>
> err_setup:
> mlx5_vdpa_destroy_mr(mvdev);
> err_mr:
> + mutex_unlock(&ndev->reslock);
> return err;
> }
>
> @@ -2157,7 +2170,8 @@ static int setup_driver(struct mlx5_vdpa_dev *mvdev)
> struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
> int err;
>
> - mutex_lock(&ndev->reslock);
> + WARN_ON(!mutex_is_locked(&ndev->reslock));
> +
> if (ndev->setup) {
> mlx5_vdpa_warn(mvdev, "setup driver called for already setup driver\n");
> err = 0;
> @@ -2187,7 +2201,6 @@ static int setup_driver(struct mlx5_vdpa_dev *mvdev)
> goto err_fwd;
> }
> ndev->setup = true;
> - mutex_unlock(&ndev->reslock);
>
> return 0;
>
> @@ -2198,23 +2211,22 @@ static int setup_driver(struct mlx5_vdpa_dev *mvdev)
> err_rqt:
> teardown_virtqueues(ndev);
> out:
> - mutex_unlock(&ndev->reslock);
> return err;
> }
>
> static void teardown_driver(struct mlx5_vdpa_net *ndev)
> {
> - mutex_lock(&ndev->reslock);
> +
> + WARN_ON(!mutex_is_locked(&ndev->reslock));
> +
> if (!ndev->setup)
> - goto out;
> + return;
>
> remove_fwd_to_tir(ndev);
> destroy_tir(ndev);
> destroy_rqt(ndev);
> teardown_virtqueues(ndev);
> ndev->setup = false;
> -out:
> - mutex_unlock(&ndev->reslock);
> }
>
> static void clear_vqs_ready(struct mlx5_vdpa_net *ndev)
> @@ -2235,6 +2247,8 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
>
> print_status(mvdev, status, true);
>
> + mutex_lock(&ndev->reslock);
> +
> if ((status ^ ndev->mvdev.status) & VIRTIO_CONFIG_S_DRIVER_OK) {
> if (status & VIRTIO_CONFIG_S_DRIVER_OK) {
> err = setup_driver(mvdev);
> @@ -2244,16 +2258,19 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
> }
> } else {
> mlx5_vdpa_warn(mvdev, "did not expect DRIVER_OK to be cleared\n");
> - return;
> + goto err_clear;
> }
> }
>
> ndev->mvdev.status = status;
> + mutex_unlock(&ndev->reslock);
> return;
>
> err_setup:
> mlx5_vdpa_destroy_mr(&ndev->mvdev);
> ndev->mvdev.status |= VIRTIO_CONFIG_S_FAILED;
> +err_clear:
> + mutex_unlock(&ndev->reslock);
> }
>
> static int mlx5_vdpa_reset(struct vdpa_device *vdev)
> @@ -2263,6 +2280,8 @@ static int mlx5_vdpa_reset(struct vdpa_device *vdev)
>
> print_status(mvdev, 0, true);
> mlx5_vdpa_info(mvdev, "performing device reset\n");
> +
> + mutex_lock(&ndev->reslock);
> teardown_driver(ndev);
> clear_vqs_ready(ndev);
> mlx5_vdpa_destroy_mr(&ndev->mvdev);
> @@ -2275,6 +2294,7 @@ static int mlx5_vdpa_reset(struct vdpa_device *vdev)
> if (mlx5_vdpa_create_mr(mvdev, NULL))
> mlx5_vdpa_warn(mvdev, "create MR failed\n");
> }
> + mutex_unlock(&ndev->reslock);
>
> return 0;
> }
> --
> 2.18.1