[PATCH 1/2] arm64: dts: uDPU: update partition table

[Robert Marko]

Partition currently called "uboot" does not only contain U-boot, but
rather it contains TF-A, U-boot and U-boot environment.

So, to avoid accidentally deleting the U-boot environment which is
located at 0x180000 split the partition.

"uboot" is not the correct name as you can't boot these boards with U-boot
only, TF-A must be present as well, so rename the "uboot" partition to
"firmware".

While we are here, describe the NOR node as "spi-flash@0" instead of
"m25p80@0" which is the old SPI-NOR driver name.

Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
---
 arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index 95d46e8d081c..ac64949bb53e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -99,7 +99,7 @@ &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_quad_pins>;
 
-	m25p80@0 {
+	spi-flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <54000000>;
@@ -108,10 +108,15 @@ partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			/* only bootloader is located on the SPI */
+
 			partition@0 {
-				label = "uboot";
-				reg = <0 0x400000>;
+				label = "firmware";
+				reg = <0x0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
 			};
 		};
 	};
-- 
2.35.1