Re: [PATCH v2 4/6] pinctrl: qcom: sm6350: fix order of UFS & SDC pins

[Luca Weiss]

Hi Bjorn,

On Mon Mar 21, 2022 at 3:15 PM CET, Bjorn Andersson wrote:
> On Mon 21 Mar 08:33 CDT 2022, Luca Weiss wrote:
>
> > In other places the SDC and UFS pins have been swapped but this was
> > missed in the PINCTRL_PIN definitions. Fix that.
> > 
> > Fixes: 7d74b55afd27 ("pinctrl: qcom: Add SM6350 pinctrl driver")
> > Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
>
> Your proposed change looks good, but when I look at 7d74b55afd27 it
> already has these entries in the correct order.
>
> Can you please confirm that this is still applicable. Or help me see
> what I am missing.

There are 3 times where number and description should match.
For this UFS pin on sm6350 only 2/3 match.
2x the number is 156, 1x it's 163

$ grep -i ufs_reset drivers/pinctrl/qcom/pinctrl-sm6350.c
        PINCTRL_PIN(163, "UFS_RESET"),
static const unsigned int ufs_reset_pins[] = { 156 };
        [156] = UFS_RESET(ufs_reset, 0xae000),

Does that help?

Regards
Luca


>
> Regards,
> Bjorn
>
> > ---
> > Changes in v2:
> > - nothing
> > 
> >  drivers/pinctrl/qcom/pinctrl-sm6350.c | 16 ++++++++--------
> >  1 file changed, 8 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/pinctrl/qcom/pinctrl-sm6350.c b/drivers/pinctrl/qcom/pinctrl-sm6350.c
> > index 4d37b817b232..a91a86628f2f 100644
> > --- a/drivers/pinctrl/qcom/pinctrl-sm6350.c
> > +++ b/drivers/pinctrl/qcom/pinctrl-sm6350.c
> > @@ -264,14 +264,14 @@ static const struct pinctrl_pin_desc sm6350_pins[] = {
> >  	PINCTRL_PIN(153, "GPIO_153"),
> >  	PINCTRL_PIN(154, "GPIO_154"),
> >  	PINCTRL_PIN(155, "GPIO_155"),
> > -	PINCTRL_PIN(156, "SDC1_RCLK"),
> > -	PINCTRL_PIN(157, "SDC1_CLK"),
> > -	PINCTRL_PIN(158, "SDC1_CMD"),
> > -	PINCTRL_PIN(159, "SDC1_DATA"),
> > -	PINCTRL_PIN(160, "SDC2_CLK"),
> > -	PINCTRL_PIN(161, "SDC2_CMD"),
> > -	PINCTRL_PIN(162, "SDC2_DATA"),
> > -	PINCTRL_PIN(163, "UFS_RESET"),
> > +	PINCTRL_PIN(156, "UFS_RESET"),
> > +	PINCTRL_PIN(157, "SDC1_RCLK"),
> > +	PINCTRL_PIN(158, "SDC1_CLK"),
> > +	PINCTRL_PIN(159, "SDC1_CMD"),
> > +	PINCTRL_PIN(160, "SDC1_DATA"),
> > +	PINCTRL_PIN(161, "SDC2_CLK"),
> > +	PINCTRL_PIN(162, "SDC2_CMD"),
> > +	PINCTRL_PIN(163, "SDC2_DATA"),
> >  };
> >  
> >  #define DECLARE_MSM_GPIO_PINS(pin) \
> > -- 
> > 2.35.1
> >