Re: [PATCH v2 2/2] mfd: arizona-spi: Add Android board ACPI table handling

[Lee Jones]

On Mon, 07 Mar 2022, Hans de Goede wrote:

> x86/ACPI boards with an arizona WM5102 codec ship with either Windows or
> Android as factory installed OS.
> 
> The ACPI fwnode for the codec on Android boards misses 2 things compared
> to the Windows boards (this is hardcoded in the Android board kernels):
> 
> 1. There is no CLKE ACPI method to enabe the 32 KHz clock the codec needs
>    for jack-detection.
> 
> 2. The GPIOs used by the codec are not listed in the fwnode for the codec.
> 
> The ACPI tables on x86/ACPI boards shipped with Android being incomplete
> happens a lot. The special drivers/platform/x86/x86-android-tablets.c
> module contains DMI based per model handling to compensate for this.
> 
> This module will enable the 32KHz clock through the pinctrl framework
> to fix 1. and it will also register a gpio-lookup table for all GPIOs
> needed by the codec + machine driver, including the GPIOs coming from
> the codec itself.
> 
> Add an arizona_spi_acpi_android_probe() function which waits for the
> x86-android-tablets to have set things up before continue with probing
> the arizona WM5102 codec.
> 
> Acked-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> Changes in v2:
> - Wrap long dev_info_once() line
> ---
>  drivers/mfd/arizona-spi.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog