Re: PCI: Race condition in pci_create_sysfs_dev_files (can't boot)

[Koen Vandeputte]

On 15.02.22 07:35, Krzysztof Hałasa wrote:
> Hi Bjorn,
>
> Bjorn Helgaas <helgaas@xxxxxxxxxx> writes:
>
> > Koen collected some interesting logs at
> > https://lore.kernel.org/all/cd4812f0-1de3-0582-936c-ba30906595af@xxxxxxxxxxxx/
> > They're from v5.10, which was before all of Krzysztof W's nice work
> > converting to static attributes, but Koen's log shows the error
> > happening in the pci_sysfs_init() initcall, which is *after*
> > imx6_pcie_probe():
> >
> >    imx6_pcie_probe                # probably device initcall (level 6)
> >      ...
> >        pci_create_sysfs_dev_files
> >
> >    pci_sysfs_init                 # late initcall (level 7)
> >      pci_create_sysfs_dev_files
> >        "sysfs: cannot create duplicate filename"
> Well, imx6_pcie_probe() is called indirectly by
> platform_driver_register(). I guess it doesn't know about the initcall
> ordering, after it's registered.
>
> It looks like the problem is the imx6_pcie_probe() (via
> dw_pcie_host_init() -> pci_host_probe()) is interfering with
> pci_sysfs_init(). This may eventually cause some invalid memory access
> as well.
>
> BTW I thought for a moment that maybe 5.14 is free from this. I was
> wrong. The problem doesn't manifest itself on my custom i.MX6 device
> (using Tinyrex CPU module from Voipac/Fedevel, perhaps because I don't
> use any PCI devices there). It does on Ventana SBC from Gateworks,
> though. BTW the above (and below) is v5.16.
>
> It goes like this:
> [0.096212] do_initcall_level: 6
> [0.105625] imx6_pcie_init
> [0.106106] imx6_pcie_probe       <<<<<<<<<<<<<<<<<<<<<
> [0.106412] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
>
> [0.322613] imx6q-pcie 1ffc000.pcie: Link up
> [0.322776] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
> [0.322790] pci_bus 0000:00: root bus resource [bus 00-ff]
>
> [0.405251] do_initcall_level: 6 ENDs but imx6_pcie_probe() still active
> [0.405262] do_initcall_level: 7
>
> [0.410393] pci_sysfs_init        <<<<<<<<<<<<<<<<<<<<<
> [0.410423] pci 0000:00:00.0: pci_create_sysfs_dev_files
>
> [0.410532] [<8068091c>] (pci_create_sysfs_dev_files)
> [0.410551] [<80918710>] (pci_sysfs_init)
> [0.410568] [<8010166c>] (do_one_initcall)
>
> [0.410717] pci_sysfs_init END    <<<<<<<<<<<<<<<<<<<<<
>
> [0.533843] [<803f1c74>] (pci_bus_add_devices)
> [0.533862] [<803f574c>] (pci_host_probe)
> [0.533879] [<80414310>] (dw_pcie_host_init)
> [0.533895] [<80681ac8>] (imx6_pcie_probe)
> [0.533915] [<8045e9e4>] (platform_probe)
> (Repeats multiple times, I guess for each PCI device)
>
> [0.543893] imx6_pcie_probe END   <<<<<<<<<<<<<<<<<<<<<
>
> [0.692244] do_initcall_level: 7 END


Hi all,

Any update on this topic?
I just tested kernel 5.15 on imx6 (gateworks Ventana 5200) and as soon 
as I connect a pcie device on one of the ports,

following happens:

https://pastebin.com/raw/mgfSvTRB

Any idea if this is related?


Thanks,

Koen