[PATCH 2/6] arm64: dts: qcom: pmi8998: add smb2 node

[Caleb Connolly]

Add a node for the smb2 charger hardware found on the pmi8998.

Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index da10668c361d..b98dad166a0b 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,6 +9,21 @@ pmi8998_lsid0: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8998_smb2: smb2@1000 {
+			compatible = "qcom,pmi8998-smb2";
+			reg = <0x1000>;
+
+			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb-plugin";
+
+			io-channels = <&pmi8998_rradc 3>,
+				      <&pmi8998_rradc 4>;
+			io-channel-names = "usbin_i",
+					   "usbin_v";
+
+			status = "disabled";
+		};
+
 		pmi8998_gpio: gpios@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.35.1