Re: [PATCH v2 5/5] iio: accel: bma400: Add step change event

From: Jonathan Cameron
Date: Sat Apr 02 2022 - 12:29:32 EST


On Tue, 29 Mar 2022 02:07:11 +0530
Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:

> Hi Jonathan,
>
> On Sun, Mar 27, 2022 at 05:50:36PM +0100, Jonathan Cameron wrote:
> > On Sun, 27 Mar 2022 01:11:46 +0530
> > Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
> >
> > > Added support for event when there is a detection of step change.
> > > INT1 pin is used to interrupt and event is pushed to userspace.
> > >
> > > Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
> >
> > These last two patches look fine to me. Simply having the
> > event enable the channel makes things simpler.
>
> Means do I need to drop the step _INFO_ENABLE and handle the
> enabling and disabling of step channel through the event enable and
> disable?

No. I was trying to say I like the solution you have now.

>
> > I briefly wondered if we need to care about sequences like
> >
> > 1) Enable event
> > 2) Enable channel (already enabled, but perhaps this indicates separate intent)
> > 3) Disable event.
> > 4) Is the channel still enabled?
> >
> > or the simpler case of whether we should disable the channel if the event is
> > disabled and it wasn't otherwise turned on.
> >
> > However, I can't see a sensible way to do so. Hence I think what you have
> > gone with is the best we can do.
> >
> > Thanks,
> >
> > Jonathan
>
> Thanks for reviewing the patch series. I will also address all the comments
> from Andy in the next patch v3.
>
> Thank you
> Jagath
> >
> > > ---
> > > drivers/iio/accel/bma400.h | 2 +
> > > drivers/iio/accel/bma400_core.c | 73 +++++++++++++++++++++++++++++++++
> > > 2 files changed, 75 insertions(+)
> > >
> > > diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
> > > index c9b856b37021..c4ec0cf6dc00 100644
> > > --- a/drivers/iio/accel/bma400.h
> > > +++ b/drivers/iio/accel/bma400.h
> > > @@ -39,6 +39,7 @@
> > > #define BMA400_INT_STAT0_REG 0x0e
> > > #define BMA400_INT_STAT1_REG 0x0f
> > > #define BMA400_INT_STAT2_REG 0x10
> > > +#define BMA400_INT12_MAP_REG 0x23
> > >
> > > /* Temperature register */
> > > #define BMA400_TEMP_DATA_REG 0x11
> > > @@ -54,6 +55,7 @@
> > > #define BMA400_STEP_CNT3_REG 0x17
> > > #define BMA400_STEP_STAT_REG 0x18
> > > #define BMA400_STEP_INT_MSK BIT(0)
> > > +#define BMA400_STEP_STAT_MASK GENMASK(9, 8)
> > >
> > > /*
> > > * Read-write configuration registers
> > > diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
> > > index ec2f9c380bda..aaa104a2698b 100644
> > > --- a/drivers/iio/accel/bma400_core.c
> > > +++ b/drivers/iio/accel/bma400_core.c
> > > @@ -24,6 +24,7 @@
> > > #include <linux/iio/iio.h>
> > > #include <linux/iio/sysfs.h>
> > > #include <linux/iio/buffer.h>
> > > +#include <linux/iio/events.h>
> > > #include <linux/iio/trigger.h>
> > > #include <linux/iio/trigger_consumer.h>
> > > #include <linux/iio/triggered_buffer.h>
> > > @@ -70,6 +71,7 @@ struct bma400_data {
> > > int scale;
> > > struct iio_trigger *trig;
> > > int steps_enabled;
> > > + bool step_event_en;
> > > /* Correct time stamp alignment */
> > > struct {
> > > __le16 buff[3];
> > > @@ -167,6 +169,12 @@ static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
> > > { }
> > > };
> > >
> > > +static const struct iio_event_spec bma400_step_detect_event = {
> > > + .type = IIO_EV_TYPE_CHANGE,
> > > + .dir = IIO_EV_DIR_NONE,
> > > + .mask_separate = BIT(IIO_EV_INFO_ENABLE),
> > > +};
> > > +
> > > #define BMA400_ACC_CHANNEL(_index, _axis) { \
> > > .type = IIO_ACCEL, \
> > > .modified = 1, \
> > > @@ -209,6 +217,8 @@ static const struct iio_chan_spec bma400_channels[] = {
> > > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > > BIT(IIO_CHAN_INFO_ENABLE),
> > > .scan_index = -1, /* No buffer support */
> > > + .event_spec = &bma400_step_detect_event,
> > > + .num_event_specs = 1,
> > > },
> > > IIO_CHAN_SOFT_TIMESTAMP(4),
> > > };
> > > @@ -878,6 +888,58 @@ static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev,
> > > }
> > > }
> > >
> > > +static int bma400_read_event_config(struct iio_dev *indio_dev,
> > > + const struct iio_chan_spec *chan,
> > > + enum iio_event_type type,
> > > + enum iio_event_direction dir)
> > > +{
> > > + struct bma400_data *data = iio_priv(indio_dev);
> > > +
> > > + switch (type) {
> > > + case IIO_EV_TYPE_CHANGE:
> > > + return data->step_event_en;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > +static int bma400_write_event_config(struct iio_dev *indio_dev,
> > > + const struct iio_chan_spec *chan,
> > > + enum iio_event_type type,
> > > + enum iio_event_direction dir, int state)
> > > +{
> > > + int ret;
> > > + struct bma400_data *data = iio_priv(indio_dev);
> > > +
> > > + switch (type) {
> > > + case IIO_EV_TYPE_CHANGE:
> > > + mutex_lock(&data->mutex);
> > > + if (!data->steps_enabled) {
> > > + ret = regmap_update_bits(data->regmap,
> > > + BMA400_INT_CONFIG1_REG,
> > > + BMA400_STEP_INT_MSK,
> > > + FIELD_PREP(BMA400_STEP_INT_MSK,
> > > + 1));
> > > + if (ret)
> > > + return ret;
> > > + data->steps_enabled = 1;
> > > + }
> > > +
> > > + ret = regmap_update_bits(data->regmap,
> > > + BMA400_INT12_MAP_REG,
> > > + BMA400_STEP_INT_MSK,
> > > + FIELD_PREP(BMA400_STEP_INT_MSK,
> > > + state));
> > > + mutex_unlock(&data->mutex);
> > > + if (ret)
> > > + return ret;
> > > + data->step_event_en = state;
> > > + return 0;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > static int bma400_data_rdy_trigger_set_state(struct iio_trigger *trig,
> > > bool state)
> > > {
> > > @@ -910,6 +972,8 @@ static const struct iio_info bma400_info = {
> > > .read_avail = bma400_read_avail,
> > > .write_raw = bma400_write_raw,
> > > .write_raw_get_fmt = bma400_write_raw_get_fmt,
> > > + .read_event_config = bma400_read_event_config,
> > > + .write_event_config = bma400_write_event_config,
> > > };
> > >
> > > static const struct iio_trigger_ops bma400_trigger_ops = {
> > > @@ -965,6 +1029,15 @@ static irqreturn_t bma400_interrupt(int irq, void *private)
> > > ret = IRQ_HANDLED;
> > > }
> > >
> > > + if (FIELD_GET(BMA400_STEP_STAT_MASK, le16_to_cpu(status))) {
> > > + iio_push_event(indio_dev,
> > > + IIO_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD,
> > > + IIO_EV_DIR_NONE,
> > > + IIO_EV_TYPE_CHANGE, 0, 0, 0),
> > > + iio_get_time_ns(indio_dev));
> > > + ret = IRQ_HANDLED;
> > > + }
> > > +
> > > return ret;
> > > }
> > >
> >