Re: [PATCH 6/6] dt-bindings: power: supply: qcom,smb2: add bindings for smb2 driver

From: Krzysztof Kozlowski
Date: Sun Apr 03 2022 - 03:56:33 EST


On 03/04/2022 09:14, Kuldeep Singh wrote:
> On Fri, Apr 01, 2022 at 09:26:43PM +0100, Caleb Connolly wrote:
>> Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger
>> drivers.
>>

(...)

>
>> + pmic {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #interrupt-cells = <4>;
>> +
>> + smb2@1000 {
>> + compatible = "qcom,pmi8998-smb2";
>> + reg = <0x1000>;
>> +
>> + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>;
>> + interrupt-names = "usb-plugin";
>> +
>
> In-between new lines may not be required.
> And DTs use tabs instead of 2 spaces, we can follow that here also.

The DT examples in bindings use spaces. Either two (like YAML) or four
(for easier reading).

>
>> + io-channels = <&pmi8998_rradc 3>,
>> + <&pmi8998_rradc 4>;
>> + io-channel-names = "usbin_i",
>> + "usbin_v";
>
> Channel-names can be written in one line.

They match the format of io-channels, so this is quite readable.



Best regards,
Krzysztof