[PATCH 5.17 1097/1126] dt-bindings: pinctrl: mt8195: fix bias-pull-{up,down} checks

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>

commit c76eeb14ec4e645a23ed8d627c7e38eca048c527 upstream.

When the constraints and description for bias-pull-{up,down} were added,
the constraints were not indented correctly, resulting in them being
parsed as part of the description. This effectively nullified their
purpose.

Move the constraints out of the description block, make each description
part of the same associative array as the enum its describing, and
reindent them correctly so they take effect.

Also add "type: boolean" to the list of valid values. This corresponds
to having bias-pull-{up,down} without any arguments.

Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220202153528.707185-1-wenst@xxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml |   30 +++++-----
 1 file changed, 16 insertions(+), 14 deletions(-)

--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -99,6 +99,14 @@ patternProperties:
             enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
           bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8195 pull down RSEL type si unit value(ohm).
             description: |
               For pull down type is normal, it don't need add RSEL & R1R0 define
               and resistance value.
@@ -115,13 +123,6 @@ patternProperties:
               & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
               define in mt8195. It can also support resistance value(ohm)
               "75000" & "5000" in mt8195.
-              oneOf:
-                - enum: [100, 101, 102, 103]
-                - description: mt8195 pull down PUPD/R0/R1 type define value.
-                - enum: [200, 201, 202, 203, 204, 205, 206, 207]
-                - description: mt8195 pull down RSEL type define value.
-                - enum: [75000, 5000]
-                - description: mt8195 pull down RSEL type si unit value(ohm).
 
               An example of using RSEL define:
               pincontroller {
@@ -146,6 +147,14 @@ patternProperties:
               };
 
           bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8195 pull up RSEL type si unit value(ohm).
             description: |
               For pull up type is normal, it don't need add RSEL & R1R0 define
               and resistance value.
@@ -163,13 +172,6 @@ patternProperties:
               define in mt8195. It can also support resistance value(ohm)
               "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" &
               "75000" in mt8195.
-              oneOf:
-                - enum: [100, 101, 102, 103]
-                - description: mt8195 pull up PUPD/R0/R1 type define value.
-                - enum: [200, 201, 202, 203, 204, 205, 206, 207]
-                - description: mt8195 pull up RSEL type define value.
-                - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
-                - description: mt8195 pull up RSEL type si unit value(ohm).
               An example of using RSEL define:
               pincontroller {
                 i2c0-pins {